Dead-time effect modeling for hybrid modular multilevel converter using twin mapping

• High-efficiency equivalent model for MMCs considering dead time characteristics. • Detailed analysis of the modal transition of full- and half-bridge submodules during dead time. • Twin mapping method enabling dead-time characteristics in Thevenin equivalent models. • EMT Characteristics validated by comparing with SOTA models and the accuracy and efficiency are demonstrated. • Notches and spikes caused by dead time are accurately regenerated, providing a model foundation for further research. Dead-time control is essential for modular multilevel converters (MMCs), but it negatively impacts MMC performance. To support the development of control strategies to mitigate the adverse effects of dead-time, electromagnetic transient (EMT) simulations are crucial for analyzing MMCs’ dead-time behavior and developing strategies to mitigate these effects. However, simulating the impact of dead-time in high-level MMCs remains a challenge. The complex modular cascaded circuit significantly slows simulation speed, while the freewheeling conduction of submodule diodes during dead-time disrupts the integrity of submodules in each bridge-arm. This makes it difficult to represent the circuit as a unified Thevenin equivalent for simplification. To address the issue, the dead-time effect is modeled using a diode-H-bridge in this paper. Submodules are categorized into those affected by the dead-time effect and those not. This paper also proposes the capacitor state mapping approach, referred to as “twin mapping method”, to restore the submodules’ behavior during and outside the dead-time, eliminating the isolation of submodules and enabling the application of the Thevenin equivalent theorem. Finally, a Thevenin equivalent model (EM) is developed and compared with a detailed model (DM) and state-space model (SSM). PSCAD/EMTDC simulations demonstrate that the proposed EM effectively captures dead-time spikes and notches while significantly accelerating simulation speed.

Authors

Institutions

Publication Details

Journal
International Journal of Electrical Power & Energy Systems
Published
2026-02-01
DOI
https://doi.org/10.1016/j.ijepes.2026.111623
Primary Topic
HVDC Systems and Fault Protection
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Dead-time effect modeling for hybrid modular multilevel converter using twin mapping

Moke Feng, Keying Pan, Hang Jing, Jianzhong Xu et al.
International Journal of Electrical Power & Energy Systems
HVDC Systems and Fault Protection
article

Dead-time effect modeling for hybrid modular multilevel converter using twin mapping

Moke Feng, Keying Pan, Hang Jing, Jianzhong Xu, Ming Yang, Wenxia Sima
article en

Abstract

• High-efficiency equivalent model for MMCs considering dead time characteristics. • Detailed analysis of the modal transition of full- and half-bridge submodules during dead time. • Twin mapping method enabling dead-time characteristics in Thevenin equivalent models. • EMT Characteristics validated by comparing with SOTA models and the accuracy and efficiency are demonstrated. • Notches and spikes caused by dead time are accurately regenerated, providing a model foundation for further research. Dead-time control is essential for modular multilevel converters (MMCs), but it negatively impacts MMC performance. To support the development of control strategies to mitigate the adverse effects of dead-time, electromagnetic transient (EMT) simulations are crucial for analyzing MMCs’ dead-time behavior and developing strategies to mitigate these effects. However, simulating the impact of dead-time in high-level MMCs remains a challenge. The complex modular cascaded circuit significantly slows simulation speed, while the freewheeling conduction of submodule diodes during dead-time disrupts the integrity of submodules in each bridge-arm. This makes it difficult to represent the circuit as a unified Thevenin equivalent for simplification. To address the issue, the dead-time effect is modeled using a diode-H-bridge in this paper. Submodules are categorized into those affected by the dead-time effect and those not. This paper also proposes the capacitor state mapping approach, referred to as “twin mapping method”, to restore the submodules’ behavior during and outside the dead-time, eliminating the isolation of submodules and enabling the application of the Thevenin equivalent theorem. Finally, a Thevenin equivalent model (EM) is developed and compared with a detailed model (DM) and state-space model (SSM). PSCAD/EMTDC simulations demonstrate that the proposed EM effectively captures dead-time spikes and notches while significantly accelerating simulation speed.

International Journal of Electrical Power & Energy SystemsVol. 175
North China Electric Power University (CN), Chongqing University (CN)
Openalex Percentile: Top 68%
HVDC Systems and Fault Protection
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.