Design and Numerical Analysis of an Ultra-Sensitive π-Configuration Fibre Optic-Based SPR Sensor: Dual Plasmonic Enhancement for Low-Refractive-Index Biomolecular Detection

Surface plasmon resonance (SPR)-based optical fibre sensors have transformed label-free biosensing; however, single-interface evanescent field interactions continue to limit their sensitivity. This study presents a novel π-configuration optical fibre-based surface plasmon resonance sensor that greatly increases sensitivity by enabling dual plasmonic excitation on two symmetrically polished surfaces coated with optimized metallic thin films (Ag, Au, or Cu). We show, using finite element method simulations in COMSOL Multiphysics v6.3, that the π-configuration increases the interaction volume between the analyte and guided light, resulting in an enhanced sensitivity of 3300 nm/RIU for silver at refractive index (RI) 1.37–1.38, which is a 120% improvement over traditional D-shaped sensors (1500 nm/RIU). The maximum field norm for the π-configuration sensor is approximately 1.4 times greater than the maximum observed for the D-shaped SPR sensor at an analyte RI of 1.38. The sensor’s performance is evaluated using full-width half-maximum, wavelength sensitivity, and wavelength interrogation metrics. For the π-configuration sensor at an analyte RI of 1.38, the values of the FWHM, figure of merit, detection accuracy, and confinement loss were 36 nm, 94.29 RIU−1, 0.94, and 38.5 dB/cm, respectively. The results obtained are purely simulated using COMSOL. With the support of electric field confinement analysis, a thorough theoretical framework describes the crucial coupling regime that causes ultra-high sensitivity at low RI. This design provides new opportunities for environmental monitoring, low-abundance biomarker screening, and early-stage virus detection, where it is necessary to resolve minute RI changes with high precision.