Shaping hydrogel bioinks into 3D, multiscale, perfusable models using multimodal printing

Despite technological advances, the fabrication of multiscale, multi-material, and topologically complex 3D structures using soft hydrogel bioinks remains a challenge due to the inherent trade-offs between print size/resolution, bioink properties, and design complexity. In this work, we combine additive (macroscale) digital light projection (DLP) mode with subtractive (microscale) two-photon ablation (TPA) mode with multi-material exchange capability. We identify ideal hydrogel bioink formulations that are compatible with both DLP and TPA modes of processing. Technical challenges related to multimodal fabrication such as alignment of multiscale topologies to facilitate seamless media perfusion, soft-hard multi-material printing to facilitate handling of mechanically weak hydrogel constructs, and hydrogel swelling during printing, were resolved. To highlight the novelty of this hybrid platform, we fabricated centimeter-scale bioink constructs with embedded microscale perfusable topologies that cannot be achieved by isolated use of either DLP or TPA modes. This includes simpler microfluidic chips with independently perfusable microchannels to more complex 3D constructs with embedded, multiscale, perfusable dual-fluidic circuits that mimic the alveoli-capillary interface, or microfluidic chips with endothelialized microchannels. The unique ability of this multimodal platform to mimic <i>in vivo</i> -like multiscale complexities can be potentially used to develop next-generation organ-on-chips.