Real-Time Trajectory Replanning and Tracking Control of Cable-Driven Continuum Robots in Uncertain Environments

To address trajectory tracking of cable-driven continuum robots (CDCRs) in the presence of obstacles, this paper proposes an integrated control framework that combines online trajectory replanning, obstacle avoidance, and tracking control. The control system consists of two modules. The first is a trajectory replanning controller developed on an improved model predictive control (IMPC) framework. The second is a trajectory-tracking controller that integrates an adaptive disturbance observer with a fast non-singular terminal sliding mode control (ADO-FNTSMC) strategy. The IMPC trajectory replanning controller updates the trajectory of the CDCRs to avoid collisions with obstacles. In the ADO-FNTSMC strategy, the adaptive disturbance observer (ADO) compensates for uncertain dynamic factors, including parametric uncertainties, unmodeled dynamics, and external disturbances, thereby enhancing the system’s robustness and improving trajectory tracking accuracy. Meanwhile, the fast non-singular terminal sliding mode control (FNTSMC) guarantees fast, stable, and accurate trajectory tracking. The average tracking errors for IMPC-ADO-FNTSMC, MPC-FNTSMC, and MPC-SMC are 1.185 cm, 1.540 cm, and 1.855 cm, with corresponding standard deviations of 0.035 cm, 0.057 cm, and 0.078 cm in the experimental results. Compared with MPC-FNTSMC and MPC-SMC, the IMPC-ADO-FNTSMC controller reduces average tracking errors by 29.96% and 56.54%. Simulation and experimental results demonstrate that the designed two-module controller (IMPC-ADO-FNTSMC) achieves fast, stable, and accurate trajectory tracking in the presence of obstacles and uncertain dynamic conditions.