Boiling, Degassing, and Mixing of Fluids in the Trans-Himalayan Geothermal Systems, India

Geothermal fluids, during ascent, are subjected to various secondary processes which alter their chemistry from reservoir to surface discharge. We have characterized and quantified various secondary processes such as degassing, boiling, and mixing in this study for the Trans-Himalayan geothermal fluids. The geochemical facies of thermal waters are found to be Na–Cl for Puga, mixed type (Na–Cl–SO4–HCO3 ) for Chumathang and Panamik, and Na–HCO3 type for Changlung having neutral to moderately alkaline pH (6.7–8.9) along with TDS ranging from 525 mg/l to 2931 mg/l. The geothermal reservoir temperature cal- culated from the Na–K cation geothermometry varies between 170–260◦C. The reser- voir fluids, constructed by adding liquid and steam phases compositions, exhibit near- neutral pH (6.47–7.03) with lower TDS than surface discharges (∼561–1811 mg/l). The surface geothermal water is found to be the resultant mixture of three end-members (non- thermal water, boiled reservoir water, and condensed steam) based on which a ternary mixing model has been developed. The SiO2–temperature relation indicates undersatu- ration with respect to amorphous silica but equilibrium to supersaturation with respect to chalcedony and quartz. This pattern implies boiling-driven fluid evolution, kinetically con- trolled silica scaling, and progressively more mature reservoir waters from Panamik and Puga geothermal area. Geochemical modeling result shows that all geothermal fluids have >40% of boiled deep fluids, traced with conservative component, Cl. The fraction of con- densed steam is highest in Changlung (∼ 11–34%) and lowest in Chumathang (∼ 13%) and Panamik (∼2–19%) with Puga lying in the intermediate stage (∼8–24%) (traced with reactive component, dissolved CO2 ). All thermal waters exhibit mixing with local meteoric waters, with cold-water contributions ranging from 14–42%. Overall, these results highlight the role of boiling and mixing phenomenon shaping the fluid composition of the Trans- Himalayan geothermal systems.

Authors

Institutions

Publication Details

Journal
Earth Systems Resources and Sustainability
Published
2026-01-29
DOI
https://doi.org/10.53941/esrs.2026.100009
Primary Topic
CO2 Sequestration and Geologic Interactions
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Boiling, Degassing, and Mixing of Fluids in the Trans-Himalayan Geothermal Systems, India

A. Krishnakanta Singh, M. L. Dora, Sitangshu Chatterjee, Anubha Bhandari et al.
Earth Systems Resources and Sustainability
CO2 Sequestration and Geologic Interactions
article

Boiling, Degassing, and Mixing of Fluids in the Trans-Himalayan Geothermal Systems, India

A. Krishnakanta Singh, M. L. Dora, Sitangshu Chatterjee, Anubha Bhandari, Vivek P. Malviya, Biswajit Ray, P. K. Singh, Parashar Mishra
article en

Abstract

Geothermal fluids, during ascent, are subjected to various secondary processes which alter their chemistry from reservoir to surface discharge. We have characterized and quantified various secondary processes such as degassing, boiling, and mixing in this study for the Trans-Himalayan geothermal fluids. The geochemical facies of thermal waters are found to be Na–Cl for Puga, mixed type (Na–Cl–SO4–HCO3 ) for Chumathang and Panamik, and Na–HCO3 type for Changlung having neutral to moderately alkaline pH (6.7–8.9) along with TDS ranging from 525 mg/l to 2931 mg/l. The geothermal reservoir temperature cal- culated from the Na–K cation geothermometry varies between 170–260◦C. The reser- voir fluids, constructed by adding liquid and steam phases compositions, exhibit near- neutral pH (6.47–7.03) with lower TDS than surface discharges (∼561–1811 mg/l). The surface geothermal water is found to be the resultant mixture of three end-members (non- thermal water, boiled reservoir water, and condensed steam) based on which a ternary mixing model has been developed. The SiO2–temperature relation indicates undersatu- ration with respect to amorphous silica but equilibrium to supersaturation with respect to chalcedony and quartz. This pattern implies boiling-driven fluid evolution, kinetically con- trolled silica scaling, and progressively more mature reservoir waters from Panamik and Puga geothermal area. Geochemical modeling result shows that all geothermal fluids have >40% of boiled deep fluids, traced with conservative component, Cl. The fraction of con- densed steam is highest in Changlung (∼ 11–34%) and lowest in Chumathang (∼ 13%) and Panamik (∼2–19%) with Puga lying in the intermediate stage (∼8–24%) (traced with reactive component, dissolved CO2 ). All thermal waters exhibit mixing with local meteoric waters, with cold-water contributions ranging from 14–42%. Overall, these results highlight the role of boiling and mixing phenomenon shaping the fluid composition of the Trans- Himalayan geothermal systems.

Earth Systems Resources and SustainabilityVol. 1(2)
Bhabha Atomic Research Centre (IN), University of Jammu (IN), Jawaharlal Nehru University (IN), Geological Survey of India (IN), Dr. Hari Singh Gour University (IN), Banaras Hindu University (IN)
Bhabha Atomic Research Centre
Clean water and sanitation
Openalex Percentile: Top 77%
CO2 Sequestration and Geologic Interactions
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.