Comparative performance evaluation of asphalt binder modified with high-content pretreated crumb rubber and various additives

The addition of high-content crumb rubber (HCCR) in asphalt can effectively address waste tire pollution and provide sustainable environmental and economic advantages. However, the practical application of conventional rubberized binders is significantly limited by high viscosity and poor storage stability. To address these issues, researchers have pretreated crumb rubber (CR) with oil, but high-temperature performance remains insufficient. Therefore, this study aimed to optimize the viscosity, storage stability, and rheological properties of high-content crumb rubber-modified asphalt (HCCRMA) by varying the pretreatment levels of CR and incorporating various additives, including styrene-butadiene-styrene (SBS), deoiled asphalt (DA), or recycled low-density polyethylene (RLDPE). In addition, CR was pretreated with waste cooking oil (WCO) at various ratios, pre-swelling temperatures, and times. The results show that DA exhibits excellent storage stability and lower viscosity compared with other modifiers in HCCRMA, and the 4% RLDPE with pretreated HCCR has the greatest high-temperature rutting resistance. The inclusion of RLDPE increases the stiffness and elasticity of the modified asphalt, which results in greater high-temperature performance. Additionally, the fluorescence microscopy (FM) test confirms that SBS exhibits better dispersion than other modifiers and forms a more homogeneous phase separation in the HCCRMA. All in all, this research achieved an optimal balance of storage stability and rheological properties in asphalt modified with pretreated HCCR and 6% SBS, which provides a valuable reference for performance improvement of HCCR-modified binders. • Crumb rubber was pretreated with waste cooking oil at various ratios, pre-swelling temperatures, and times. • Asphalt binders modified with high-content pretreated crumb rubber and SBS, DA, or RLDPE. • The physical properties, storage stability, microstructure, rheological properties, and cost analysis were studied. • Further research on high-content crumb rubber-modified asphalt was recommended.

Authors

Institutions

Publication Details

Journal
Journal of Road Engineering
Published
2026-01-29
DOI
https://doi.org/10.1016/j.jreng.2025.07.003
Citations
1
Primary Topic
Asphalt Pavement Performance Evaluation
Type
article
Field-Weighted Citation Impact
19.37
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Comparative performance evaluation of asphalt binder modified with high-content pretreated crumb rubber and various additives

Yifan Sun, Hui Li, Zhijie Lin, Haopeng Zhang et al.
1 citations
Journal of Road Engineering
Asphalt Pavement Performance Evaluation
19.37
article

Comparative performance evaluation of asphalt binder modified with high-content pretreated crumb rubber and various additives

Yifan Sun, Hui Li, Zhijie Lin, Haopeng Zhang, Abul Khair, Liyang Wang, Yuzhao Han
article en
1 citations

Abstract

The addition of high-content crumb rubber (HCCR) in asphalt can effectively address waste tire pollution and provide sustainable environmental and economic advantages. However, the practical application of conventional rubberized binders is significantly limited by high viscosity and poor storage stability. To address these issues, researchers have pretreated crumb rubber (CR) with oil, but high-temperature performance remains insufficient. Therefore, this study aimed to optimize the viscosity, storage stability, and rheological properties of high-content crumb rubber-modified asphalt (HCCRMA) by varying the pretreatment levels of CR and incorporating various additives, including styrene-butadiene-styrene (SBS), deoiled asphalt (DA), or recycled low-density polyethylene (RLDPE). In addition, CR was pretreated with waste cooking oil (WCO) at various ratios, pre-swelling temperatures, and times. The results show that DA exhibits excellent storage stability and lower viscosity compared with other modifiers in HCCRMA, and the 4% RLDPE with pretreated HCCR has the greatest high-temperature rutting resistance. The inclusion of RLDPE increases the stiffness and elasticity of the modified asphalt, which results in greater high-temperature performance. Additionally, the fluorescence microscopy (FM) test confirms that SBS exhibits better dispersion than other modifiers and forms a more homogeneous phase separation in the HCCRMA. All in all, this research achieved an optimal balance of storage stability and rheological properties in asphalt modified with pretreated HCCR and 6% SBS, which provides a valuable reference for performance improvement of HCCR-modified binders. • Crumb rubber was pretreated with waste cooking oil at various ratios, pre-swelling temperatures, and times. • Asphalt binders modified with high-content pretreated crumb rubber and SBS, DA, or RLDPE. • The physical properties, storage stability, microstructure, rheological properties, and cost analysis were studied. • Further research on high-content crumb rubber-modified asphalt was recommended.

Journal of Road EngineeringVol. 6(1)
Tongji University (CN), Jiangsu Industry Technology Research Institute (CN)
Responsible consumption and production
Openalex Percentile: Top 2%
Asphalt Pavement Performance Evaluation
19.37
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.