Reactivity influence on carbonaceous particle layer break-up and relocation events in O2-based model filter regeneration

• Seven carbonaceous particle systems with differing nanostructure and reactivity were compared. • Temperature-programmed oxidation revealed a wide reactivity range. • The layer breakup and relocation events during filter regeneration could be demonstrated and analyzed over the entire channel length for the carbonaceous particle systems using high-speed recordings. Understanding the influence of soot reactivity on layer break-up and particle structure detachment and transport during diesel particulate filter regeneration is essential for optimizing aftertreatment performance. Seven carbon blacks with differing reactivity were investigated as reactive particle model systems. The oxidation behavior was characterized by temperature-programmed oxidation, revealing a wide reactivity range, with the peak oxidation temperature spanning from 817 K for a propane-soot reference to 894–976 K for the carbon blacks. This paper examines the regeneration of a model filter channel in situ with high temporal and spatial resolution. The filter is loaded with 10 mg carbon black particles and then regenerated. The regeneration of the filter is analyzed by varying the particle system under constant regeneration conditions at a gas temperature of 823 K and a channel inlet gas velocity of 60 m/s. In addition, the layer height and temperature are varied for a selected carbon black, and a more reactive hydrocarbon mixture was added to the particle layer of the selected carbon black. In selected experiments high-speed imaging of the model filter channel enabled direct observation of layer break-up and particles detaching from the filters surface. Image-based analysis enables the quantification of the black surface area reduction and isolated particle structures. All carbon blacks showed a reaction of the carbonaceous particles, with little layer break-up and formation of isolated structures, as well as minimal detachment events (0–10 events per experiment). Introducing more reactive hydrocarbons to the particle layer markedly increased fragmentation and particle relocations to more than 500 events.

Authors

Institutions

Publication Details

Journal
Chemical Engineering Science
Published
2026-01-29
DOI
https://doi.org/10.1016/j.ces.2026.123467
Primary Topic
Aerosol Filtration and Electrostatic Precipitation
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Reactivity influence on carbonaceous particle layer break-up and relocation events in O2-based model filter regeneration

Achim Dittler, Fabian P. Hagen, Ole Desens, Jörg Meyer et al.
Chemical Engineering Science
Aerosol Filtration and Electrostatic Precipitation
article

Reactivity influence on carbonaceous particle layer break-up and relocation events in O2-based model filter regeneration

Achim Dittler, Fabian P. Hagen, Ole Desens, Jörg Meyer, Özge Yavuz
article en

Abstract

• Seven carbonaceous particle systems with differing nanostructure and reactivity were compared. • Temperature-programmed oxidation revealed a wide reactivity range. • The layer breakup and relocation events during filter regeneration could be demonstrated and analyzed over the entire channel length for the carbonaceous particle systems using high-speed recordings. Understanding the influence of soot reactivity on layer break-up and particle structure detachment and transport during diesel particulate filter regeneration is essential for optimizing aftertreatment performance. Seven carbon blacks with differing reactivity were investigated as reactive particle model systems. The oxidation behavior was characterized by temperature-programmed oxidation, revealing a wide reactivity range, with the peak oxidation temperature spanning from 817 K for a propane-soot reference to 894–976 K for the carbon blacks. This paper examines the regeneration of a model filter channel in situ with high temporal and spatial resolution. The filter is loaded with 10 mg carbon black particles and then regenerated. The regeneration of the filter is analyzed by varying the particle system under constant regeneration conditions at a gas temperature of 823 K and a channel inlet gas velocity of 60 m/s. In addition, the layer height and temperature are varied for a selected carbon black, and a more reactive hydrocarbon mixture was added to the particle layer of the selected carbon black. In selected experiments high-speed imaging of the model filter channel enabled direct observation of layer break-up and particles detaching from the filters surface. Image-based analysis enables the quantification of the black surface area reduction and isolated particle structures. All carbon blacks showed a reaction of the carbonaceous particles, with little layer break-up and formation of isolated structures, as well as minimal detachment events (0–10 events per experiment). Introducing more reactive hydrocarbons to the particle layer markedly increased fragmentation and particle relocations to more than 500 events.

Chemical Engineering ScienceVol. 325
Karlsruhe Institute of Technology (DE), DVGW-Forschungsstelle am Engler-Bunte-Institut des Karlsruher Instituts für Technologie (DE)
Openalex Percentile: Top 75%
Aerosol Filtration and Electrostatic Precipitation
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.