Mechanisms of Deformation and Failure of Single-Sided Unloading Surrounding Rock and Stability Control of Roadways

To support intelligent and sustainable mine engineering, this geotechnics-based study integrates laboratory testing, three-dimensional numerical simulation, and field monitoring to optimize roadway support and improve resource efficiency. This study investigates the geotechnical behavior of the surrounding rock in coalmine roadways under single-face unloading conditions, aiming to provide theoretical and practical support for surrounding rock control in underground coal mining. Excavation of the roadway creates a free surface, leading to unloading, which makes timely support crucial for preventing instability. True-triaxial single-face unloading tests and mechanical tests on hole-containing coal specimens show that the coal exhibits four characteristic stages, namely fissure compaction (closure), elastic deformation, yielding, and residual strength. Under a confining stress of 4 MPa, the peak strength of Coal Seam No. 3 in the true-triaxial single-face unloading test reached 32.4 MPa, whereas the peak strength of the hole-containing coal specimen was only 17.1 MPa, and failure occurred as instantaneous global instability with an “X”-shaped conjugate shear pattern. Numerical simulations were conducted to optimize the roadway’s surrounding rock control scheme, indicating that increasing the bolt length increases the proportion of the load carried by the rock bolts while reducing the load borne by the cable bolts. In addition, advance abutment pressure increases the forces in the support system and amplifies deformation of the solid rib, coal-pillar rib, and roof; roadway surface convergence is dominated by floor heave.