Evaluating calcite as a catalyst for pyrite-hydrogen reactions and hydrogen sulfide generation

In nature, the presence of accessory minerals found in the subsurface have a potential to react with stored hydrogen in process of underground hydrogen storage. Pyrite (FeS 2 ), the most abundant sulfide mineral on earth and occurring in almost all geological rock formations specially the sedimentary rocks, is an ideal candidate for such reactions. Pyrite is also found in seal rocks in higher quantities and considered a critical mineral while working with subsurface hydrocarbon reservoirs. Although relatively stable at surface conditions, pyrite is still prone to oxidation in the presence of moisture and high temperatures found in subsurface reservoirs, leading to the release of sulfur. This sulfur can readily react with other elements, and in context of hydrogen storage in sedimentary rocks, it can react with hydrogen to form hydrogen sulfide (H 2 S) gas. H 2 S being extremely toxic, pose significant handling dangers along with potential degradation of the stored hydrogen fuel. Therefore, the presence of reactive and toxic material like H 2 S require careful consideration when evaluating subsurface hydrocarbon reservoirs for hydrogen storage. In this study, we examined the reaction of pyrite combined with varying concentrations of calcite (1%, 5%, and 50%), brine water (3.5 wt% NaCl), and hydrogen gas (H 2 ) under different reservoir conditions (120 °C and 250 °C, and 500 psi). The findings revealed that approximately 12% H 2 S was released, irrespective of the calcite concentrations, and the pyrite did not transform into its secondary mineral, pyrrhotite. These findings highlight the need of paying careful attention to the geochemical interactions within potential hydrogen storage sites to ensure safety and efficacy. • Pyrite reacts with H 2 to release 12% H 2 S, regardless of calcite concentration. • H 2 S release occurs only during the initial pyrite-H 2 reaction cycle. • pH remains constant (∼8) despite varying calcite concentrations. • Pyrite does not transform into pyrrhotite under tested conditions. • Geochemical interactions are crucial for safe hydrogen storage.

Authors

Institutions

Publication Details

Journal
Energy Geoscience
Published
2026-01-23
DOI
https://doi.org/10.1016/j.engeos.2026.100525
Primary Topic
Mine drainage and remediation techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Evaluating calcite as a catalyst for pyrite-hydrogen reactions and hydrogen sulfide generation

Muhammad Hammad Malik, Ahmed Zarzor Al-Yaseri, Khalid Al‐Ramadan
Energy Geoscience
Mine drainage and remediation techniques
article

Evaluating calcite as a catalyst for pyrite-hydrogen reactions and hydrogen sulfide generation

Muhammad Hammad Malik, Ahmed Zarzor Al-Yaseri, Khalid Al‐Ramadan
article en

Abstract

In nature, the presence of accessory minerals found in the subsurface have a potential to react with stored hydrogen in process of underground hydrogen storage. Pyrite (FeS 2 ), the most abundant sulfide mineral on earth and occurring in almost all geological rock formations specially the sedimentary rocks, is an ideal candidate for such reactions. Pyrite is also found in seal rocks in higher quantities and considered a critical mineral while working with subsurface hydrocarbon reservoirs. Although relatively stable at surface conditions, pyrite is still prone to oxidation in the presence of moisture and high temperatures found in subsurface reservoirs, leading to the release of sulfur. This sulfur can readily react with other elements, and in context of hydrogen storage in sedimentary rocks, it can react with hydrogen to form hydrogen sulfide (H 2 S) gas. H 2 S being extremely toxic, pose significant handling dangers along with potential degradation of the stored hydrogen fuel. Therefore, the presence of reactive and toxic material like H 2 S require careful consideration when evaluating subsurface hydrocarbon reservoirs for hydrogen storage. In this study, we examined the reaction of pyrite combined with varying concentrations of calcite (1%, 5%, and 50%), brine water (3.5 wt% NaCl), and hydrogen gas (H 2 ) under different reservoir conditions (120 °C and 250 °C, and 500 psi). The findings revealed that approximately 12% H 2 S was released, irrespective of the calcite concentrations, and the pyrite did not transform into its secondary mineral, pyrrhotite. These findings highlight the need of paying careful attention to the geochemical interactions within potential hydrogen storage sites to ensure safety and efficacy. • Pyrite reacts with H 2 to release 12% H 2 S, regardless of calcite concentration. • H 2 S release occurs only during the initial pyrite-H 2 reaction cycle. • pH remains constant (∼8) despite varying calcite concentrations. • Pyrite does not transform into pyrrhotite under tested conditions. • Geochemical interactions are crucial for safe hydrogen storage.

Energy GeoscienceVol. 7(2)
King Fahd University of Petroleum and Minerals (SA)
Openalex Percentile: Top 81%
Mine drainage and remediation techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.