Integration of Multispectral and Hyperspectral Satellite Imagery for Mineral Mapping of Bauxite Mining Wastes in Amphissa Region, Greece

The mineral-mapping capability of three spaceborne sensors with different spatial and spectral resolutions, the Environmental Mapping and Analysis Program (EnMap), Sentinel-2, and World View-3 (WV3), is assessed regarding bauxite mining wastes in Amphissa, Greece, with validation based on ground samples. We applied the well-established Linear Spectral Unmixing (LSU) and Spectral Angle Mapping (SAM) classification techniques utilizing endmembers of two established spectral libraries and incorporated ground data through geochemical and mineralogical analyses, X-ray fluorescence (XRF), Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS), and X-ray Diffraction (XRD), to assess classification performance. The main lithologies in this area are bauxites and limestones; therefore, aluminum oxyhydroxides, calcite, and iron oxide minerals were the dominant phases as indicated by the XRF/XRD results. Almost all target minerals were mapped with the three sensors and both methods. The performance of EnMap is affected by its coarser spatial resolution despite its higher spectral resolution using these methods. Sentinel-2 is most effective for mapping iron-bearing minerals, particularly hematite, due to its higher spatial resolution and the presence of diagnostic iron oxide absorption features in the VNIR. World View 3 Shortwave Infrared (WV3-SWIR) performs better when mapping calcite, benefiting from its eight SWIR spectral bands and very high spatial resolution (3.7 m). Hematite and calcite yield the highest accuracy, especially with SAM, indicating 0.80 for Sentinel-2 (10 m) for hematite and 0.87 for WV3-SWIR (3.7 m) for calcite. AlOOH shows higher accuracy with SAM, ranging from 0.57 to 0.80 across the sensors, while LSU shows lower accuracy, ranging from 0.20 to 0.73 across the sensors. This study showcases each sensor’s ability to map minerals while also demonstrating that spectral coverage and the spatial and spectral resolution, as well as the characteristics of the selected endmembers, exert a critical influence on the accuracy of mineral mapping in mine waste.