Numerical Investigation of CO2 Mineralization and Geomechanical Response During CO2 Storage in Saline Aquifer

Utilizing saline aquifers for carbon mineralization has proven to be a reliable approach for CO2 storage. However, less attention has been given to CO2 mineralization and geomechanical response at engineering durations and spatial scales. The objective of the study is to evaluate the feasibility of a potential CO2 sequestration site in the Ordos Basin, located at a depth of approximately 1100 m, using the CMG-GEM numerical simulator. A coupled hydraulic–mechanical–chemical model was formulated, accounting for multiphase fluid flow, geochemical reactions, and geomechanical response. The simulation results indicated the following: (1) When CO2 is injected into a saline formation, it can react with minerals. These chemical reactions may lead to the precipitation of certain minerals (e.g., calcite, kaolinite) and the dissolution of others (e.g., anorthite), potentially affecting the porosity and permeability of the storage formation; however, the study found that the effect on porosity is negligible, with only a 1.2% reduction observed. (2) The extent of ground uplift caused by CO2 injection is strongly influenced by the injection rate. The maximum vertical ground displacements after 25 years is 6.1 cm at an injection rate of 16,000 kg/day; when the rate is increased to 24,000 kg/day, the maximum displacement rises to 9.4 cm, indicating a 54% increase.