Silica derived from rice husk waste as anode material for lithium-ion battery: A comprehensive study

This research investigates the synthesis and characterization of silica extracted from rice husks sourced from Adani in Enugu State, Nigeria, and its application in lithium-ion batteries. In this work, two methodologies for extracting SiO 2 from rice husk were explored: rice husk pre-treatment process (acid leaching) and rice husk post-treatment process (alkaline digestion). The rice husks underwent acid leaching with 10 % HCl, followed by calcination at temperatures ranging from 500°C to 800°C. The sample post-treatment involved alkaline digestion using a 1 N sodium hydroxide solution. Results from structural analysis showed a progressive increase in purity and amorphous properties of silica up to a calcination temperature of 700°C. At 800°C, crystalline forms of silica, such as cristobalite and tridymite, were observed. The post-treated samples, especially those calcined at 700°C (PT700), exhibited comparative higher purity. Electrochemical studies were carried out using Cyclic Voltammetry (CV), Galvanostatic Charge/Discharge (GCD) and Electrochemical Impedance Spectroscopy (EIS), and the results show that the post treated rice husk that was calcined at 700 °C (PT700) had the highest specific capacity of 913 mAh g⁻¹ at a current density of 100 mA g −1 and retained ∼89 % of this capacity after 1000 charge-discharge cycles. The energy density of the PT700 sample was 302 Wh kg⁻¹ , demonstrating its potential as a viable alternative to graphite in lithium-ion battery applications. The study concludes that silica extracted from rice husks is a sustainable and efficient material for use in energy storage devices, offering significant advantages in terms of reactivity, surface area, and electrochemical performance. • Silica extracted from Adani rice husks via acid leaching and alkaline digestion shows high purity and amorphous structure. • Post-treated sample at 700°C (PT700) achieves optimal electrochemical performance with low impedance and high porosity. • PT700 delivers a specific capacity of 913 mAh g⁻¹ at 100 mA g -1 yielding an energy density of 302 Wh kg -1 . • Rice husk-derived silica offers a sustainable, cost-effective alternative to graphite anodes. • Study advances waste-to-energy solutions, promoting eco-friendly battery materials.

Authors

Institutions

Publication Details

Journal
Next Materials
Published
2026-01-16
DOI
https://doi.org/10.1016/j.nxmate.2026.101615
Primary Topic
Advancements in Battery Materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Silica derived from rice husk waste as anode material for lithium-ion battery: A comprehensive study

A.D. Omah, P.U. Nzereogu, E.I. Iwuoha, A.C. Nwanya et al.
Next Materials
Advancements in Battery Materials
article

Silica derived from rice husk waste as anode material for lithium-ion battery: A comprehensive study

A.D. Omah, P.U. Nzereogu, E.I. Iwuoha, A.C. Nwanya, F.I. Ezema
article en

Abstract

This research investigates the synthesis and characterization of silica extracted from rice husks sourced from Adani in Enugu State, Nigeria, and its application in lithium-ion batteries. In this work, two methodologies for extracting SiO 2 from rice husk were explored: rice husk pre-treatment process (acid leaching) and rice husk post-treatment process (alkaline digestion). The rice husks underwent acid leaching with 10 % HCl, followed by calcination at temperatures ranging from 500°C to 800°C. The sample post-treatment involved alkaline digestion using a 1 N sodium hydroxide solution. Results from structural analysis showed a progressive increase in purity and amorphous properties of silica up to a calcination temperature of 700°C. At 800°C, crystalline forms of silica, such as cristobalite and tridymite, were observed. The post-treated samples, especially those calcined at 700°C (PT700), exhibited comparative higher purity. Electrochemical studies were carried out using Cyclic Voltammetry (CV), Galvanostatic Charge/Discharge (GCD) and Electrochemical Impedance Spectroscopy (EIS), and the results show that the post treated rice husk that was calcined at 700 °C (PT700) had the highest specific capacity of 913 mAh g⁻¹ at a current density of 100 mA g −1 and retained ∼89 % of this capacity after 1000 charge-discharge cycles. The energy density of the PT700 sample was 302 Wh kg⁻¹ , demonstrating its potential as a viable alternative to graphite in lithium-ion battery applications. The study concludes that silica extracted from rice husks is a sustainable and efficient material for use in energy storage devices, offering significant advantages in terms of reactivity, surface area, and electrochemical performance. • Silica extracted from Adani rice husks via acid leaching and alkaline digestion shows high purity and amorphous structure. • Post-treated sample at 700°C (PT700) achieves optimal electrochemical performance with low impedance and high porosity. • PT700 delivers a specific capacity of 913 mAh g⁻¹ at 100 mA g -1 yielding an energy density of 302 Wh kg -1 . • Rice husk-derived silica offers a sustainable, cost-effective alternative to graphite anodes. • Study advances waste-to-energy solutions, promoting eco-friendly battery materials.

Next MaterialsVol. 11
University of Nigeria (NG), University of the Western Cape (ZA)
Responsible consumption and production
Openalex Percentile: Top 87%
Advancements in Battery Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.