Comprehensive parameter set and electrochemical data for a 1 Ah graphite/LNMO battery cell for physical modelling

Scope: This dataset contains electrochemical measurements for a graphite-LNMO 1 Ah prototype pouch cell that was developed and characterized within the Horizon Europe project HYDRA. The electrochemical data includes GITT, quasi-OCV, and rate capability tests on electrode level as well as rate tests and quasi-OCV on the full-cell level. The parameter set that contains geometrical, physical, microstructural, kinetic and transport parameters required to parameterize a P2D cell model will be updated in the later version. The corresponding scientific publication which will also include experimental information on the parameter identification and on the model calibration is currently under preparation and will be linked as well. The repository will be further updated in the future to comprise additional data (e.g. EIS and temperature variation) and more comprehensive data description and meta-data. This dataset supports physics-based modeling and validation of lithium-ion cell models. Summary of Dataset Contents Dataset Description Format hydra0__graphite_lnmo_1ah__qocv.bdf.csv Full cell quasi-OCV measurement (C/50) of 1Ah LNMO-Graphite pouch cell csv hydra0__graphite_lnmo_1ah__rate.bdf.csv Full cell rate perormance test of 1Ah LNMO-Graphite pouch cell csv hydra0__lithium_graphite__qocv.bdf.csv Quasi-OCP measurement (C/50) of graphite electrode in 3-electrode configuration csv hydra0__lithium_graphite__rate.bdf.csv Electrode-level rate performance test of graphite electrode csv hydra0__lithium_graphite__gitt.bdf.csv GITT measurements of graphite electrode in 3-electrode configuration csv hydra0__lithium_lnmo__qocv.bdf.csv Quasi-OCP measurement (C/50) of LNMO electrode in 3-electrode configuration csv hydra0__lithium_lnmo__rate.bdf.csv Electrode-level rate performance test of LNMO electrode csv hydra0__lithium_lnmo__gitt.bdf.csv GITT measurements of LNMO electrode in 3-electrode configuration csv hydra0_grahite_exchange_current_density.csv Exchange current density of grahite csv hydra0__graphite_lnmo_1ah__photo .jpg Image of graphite-LNMO 1 Ah prototype pouch cell jpg HYDRA0_SEM_graphite_1000x.jpg SEM image for graphite at a resolution of 1000x jpg HYDRA0_SEM_graphite_5000x.jpg SEM image for graphite at a resolution of 5000x jpg HYDRA0_SEM_lmno_1000x.jpg SEM image for lmno at a resolution of 1000x jpg HYDRA0_SEM_lmno_5000x.jpg SEM image for lmno at a resolution of 5000x jpg Cell Information Property Value Type Prototype pouch cell Manufacturer Custom (CEA) Norminal capacity (Ah) 1 Ah Chemistry Graphite-LNMO More information on cell, component and material properties will be added in a later version.A corresponding scientific publication is in preparation Test protocol: Full cell - quasi-OCV Property Value Mode constant current - charging/discharging C-Rate 1/50 Voltage window 3.5 V - 4.9 V Temperature / °C 25 Test protocol: Electrode-level - quasi-OCP Property Value Mode constant current charging/discharging in 3-electrode configuration C-Rate 1/50 Voltage window LNMO: 3 V - 4.9 VGraphite: 0.01 V - 1.5 V Temperature / °C 25 Test protocol: Electrode-level - Galvanostatic Intermittent Titration Technique (GITT) Property Value Mode GITT measurements in 3-electrode configuration Sequence C/10 pulses with duration of 2.5 min (corresponding to 240 points) followed by a relaxation phase until either ∆U < 0.5 mV/s for 30 min or t > 6 h Voltage window LNMO: 3 V - 4.9 VGraphite: 0.01 V - 1.5 V Temperature / °C 25 Test Equipment Property Value Manufacturer Basytec Model CTS Lab (half-cell), CTS standard (full-cell) Type Battery cycler Test mode see above Contact Information For inquiries or further assistance, please contact Dennis Kopljar at [email protected]