Surface Nanoengineering of Gold via Oxalic Acid Anodization: Morphology, Composition, Electronic Properties, and Corrosion Resistance in Artificial Saliva

Nanoporous gold (np-Au) has attracted significant attention for biomedical and electrochemical applications due to its high surface area, tunable morphology, and excellent biocompatibility. In this study, polycrystalline gold surfaces were modified by anodization in 0.3-0.9 M oxalic acid to produce np-Au layers. The influence of anodization conditions on surface morphology, chemical composition, electronic properties, and corrosion resistance in artificial saliva was systematically investigated. Surface morphology and porosity were analyzed by scanning electron microscopy combined with image analysis, revealing a transition from fine and uniform porosity to highly developed but structurally heterogeneous nanoporous structures with increasing oxalic acid concentration. Energy-dispersive spectroscopy confirmed surface oxidation and adsorption of oxygen- and carbon-containing species after anodization, while gold remained the dominant component. Scanning Kelvin probe measurements demonstrated significant modifications of surface electronic properties, including changes in contact potential difference, governed by nanostructure geometry and surface chemistry. Electrochemical tests in artificial saliva showed that increasing nanoporousness led to reduced thermodynamic stability, with the sample anodized in 0.3 M oxalic acid providing the most favorable balance between corrosion resistance and surface activity. These results demonstrate that oxalic acid anodization is a simple and effective approach for tailoring gold surfaces for biomedical applications, particularly in dentistry.