Designing artificial zinc phosphate tribofilms with tailored mechanical properties by altering the chain length

Zinc dialkyldithiophosphate (ZDDP), as the most prominent lubrication additive, forms tribofilms consisting primarily of zinc phosphate glasses containing sulfides. As sulfur is linked to environmental concerns, sulfur-free zinc phosphate coatings have been sputtered from a Zn 3 (PO 4 ) 2 target and investigated here. Based on the bridging to non-bridging oxygen ratio, determined by X-ray photoelectron spectroscopy (XPS), the as deposited coatings are classified as metaphosphates. As the annealing temperature is increased, the chain lengths are reduced, as witnessed by XPS data indicated by a loss of phosphorus and oxygen of the coating surface, likely due to hydrolysis with water from the atmosphere. Transmission electron microscopy energy-dispersive X-ray spectroscopy line scans show that the XPS-revealed composition change of the coating surface upon annealing occurs over the whole thickness of the coating. This alteration in composition and chain length reductions causes a rise in hardness, reduced Young's modulus, and wear resistance. Therefore, the properties of the artificial zinc phosphate tribofilms can be tailored via a thermally stimulated composition change, causing an alternation in chain length from meta- to orthophosphate and thereby enabling the design of coatings with desired mechanical properties. • Synthesis of magnetron sputtered zinc phosphate glass tribofilms. • XPS data show a reduction in chain length upon annealing, confirmed by TEM EDX. • Chain length increase causes improved mechanical and wear properties. • Properties can be tailored via thermally stimulated chain length alterations. • The shown concept enables the design of coatings with desired mechanical properties.