Sustainable Incorporation of Recycled Tire Steel and Textile Fibers as a Hybrid Mix in Concrete

Sustainability concerns over the management and handling of the growing volume of waste tires have necessitated the exploration of potential applications for the reuse and recycling of this resource, as they are categorized as hazardous wastes and are typically incinerated through thermal processing or dumped in landfills, resulting in significant environmental issues. The recycled steel and textile fibers from tires can be incorporated in concrete to assist in mitigating this impending environmental calamity, primarily by enhancing the efficacy of concrete. The present study aims to investigate the effect of using recycled tire steel fibers (RTSF) and recycled tire textile fibers (RTTF) in concrete, as economically viable and environmentally friendly alternatives to commercially available fibers. Although literature on the use of recycled fibers in concrete is available, the research is very limited in terms of their hybrid use and with minimal environmental analysis. Consequently, to address the gaps, this research concentrates on the use of RTSF and RTTF as a hybrid mix in concrete with life cycle assessment (LCA) to balance the mechanical performance and environmental sustainability. The experimental work is formulated to suggest an optimum dose of RTSF and RTTF, as a hybrid mix form, to be incorporated in concrete that imparts sufficient strength and workability. The fibers were integrated with dosages of 0.75%, 1%, and 1.25% for RTSF and 0.25%, 0.5%, and 0.75% for RTTF, respectively, by volume in non-hybrid form, while in hybrid form, they were reinforced as four different combinations (1%:0.5%, 0.75%, 0.75%, 0.5%, 0.5%:0.5%, and 0.75%:0.25%) by volume of RTSF and RTTF, respectively. Fresh and hardened properties of concrete were tested according to the ASTM standards. The results showed that concrete with hybrid fibers outperformed the concrete with normal individual fibers in both fresh and hardened states tests. The mechanical strength results showed that the synergistic use of RTSF and RTTF can enhance the strength, toughness, ductility, and crack resistance of the concrete. The hybrid mix H1 comprising 1% RTSF and 0.5% RTTF was ascertained as the optimal mix showing the highest mechanical performance with embodied CO2 and energy values only slightly higher than the control mix, while offering the significant sustainability benefit of utilizing recycled fibers.