State of Knowledge in the Field of Regenerative Hardfacing Methods in the Context of the Circular Economy

Regenerative hardfacing of steel substrates is an important technology for restoring the surface layer of components operating under wear conditions, supporting the goals of the circular economy (CE) by extending the service life of components, reducing material and energy consumption throughout their life cycle, and shortening downtime during machine repairs. The article provides a synthetic analysis of the literature on the production of functional layers exclusively on steels and systematizes process → structure → properties (PSP) relationships in the context of technological quality and the prediction of the functional properties of welds. The review covers methods used and developed in steel hardfacing (including arc processes and variants with increased energy concentration), analyzed on the basis of measurable process indicators: energy parameters (arc energy/heat input/volume energy), dilution, bead geometry, heat-affected zone characteristics, and the risk of welding defects. It has been shown that these factors determine the structural effects in the weld and the area at the fusion boundary (including phase composition and morphology, hardness gradient, and susceptibility to cracking), which translates into functional properties (hardness, wear resistance, adhesion, and fatigue life) and durability after regeneration. The main result of the work is the development of a PSP table dedicated to hardfacing on steel substrates, mapping the key “levers” of the process to structural consequences and trends in functional properties. This facilitates the identification of optimization directions (minimization of energy input and dilution while ensuring fusion continuity), which translates into longer durability after regeneration and a lower risk of defects—key, measurable effects of CE. Research gaps have also been identified regarding the comparability of results (standardization of energy metrics) and the need to determine and verify “technology windows” within the WPS/WPQR (welding procedure specification/welding procedure qualification record) for layers deposited on steels.