Engineering Performance of a Novel Geopolymer-Based Aerogel Non-Intumescent Fire-Resistive Coating

Conventional non-intumescent fire-resistive coatings often require excessive thickness and exhibit poor adhesion. To address these limitations, this study developed a novel geopolymer-based aerogel composite (GBAC) coating. The effects of aerogel content, water-to-binder (W/B) ratio, curing age, latex powder, basalt fibers, and an expansive agent on the physical and mechanical properties of GBAC were systematically investigated. The results have indicated that increasing the aerogel content and W/B ratio reduces the dry density, thermal conductivity, and compressive strength. Both basalt fibers and expansive agent significantly inhibit drying shrinkage while enhancing tensile and tensile bonding strength. Although latex powder shows a negligible effect on shrinkage reduction, it effectively improves tensile and bonding strength. The incorporation of 2.5% of latex powder, 1.0% of basalt fibers, and 4.0% of expansive agent results in a remarkable reduction in shrinkage strain by 85.23%, an increase in tensile strength by 90.93%, and an enhancement in tensile bonding strength by 64.89%. GBAC coatings with thicknesses of 20 and 25 mm can extend thermal insulating efficiency of steel plates by 84 and 108 min and make steel beams satisfy the requirements of Classes II and I fire resistance, respectively.