An adjustable-rate user-printable rain gauge calibrator

Accurate precipitation measurement is essential. However, calibration of field-deployed rain gauges remains a challenge. Many methods require laboratory conditions, costly commercial equipment, or instruments designed for specific rain gauges, which cannot accommodate smaller-diameter gauges. We introduce the Adjustable-Rate 3D Printed Rain Gauge Calibrator (AR3D) , a low-cost, open-source device designed for in situ calibration of rain gauges. The AR3D introduces three innovations: (1) an adjustable screw valve, enabling flow rate tuning from 0.15–16 mL min −1 (equivalent rainfall rates 1.3–141.2 mm h −1 , for a 9.3 cm diameter gauge), accommodating the lower flow rates needed for smaller rain gauges and allowing for validation across a wide range of rainfall rates; (2) a compact and durable design developed with low-volume reservoirs and elimination of degradable parts; and (3) an integrated pyranometer cover to generate automatic calibration event signals. We evaluated the AR3D using gravimetric tests, constant-rate stability tests, device-to-device equivalence tests, and field comparisons. Laboratory gravimetric tests of the AR3D demonstrate its ability to deliver volumes of water accurately with an average error of 0.11 % (comparable to ISO Class B tolerances for plastic volumetric flasks) at flow rates within ±5 % equivalence across independent devices, with a coefficient of variation (CV) below 5 %. The AR3D has been successfully deployed to weather stations in Kenya and the United States. Field validation of the AR3D with a single setting resulted in a flow rate CV of 8.7 %. The AR3D enabled the identification of properly functioning rain gauges, as well as an under-reporting station. The total cost of material and labor to build an AR3D is approximately USD 12.

Authors

Institutions

Publication Details

Journal
Geoscientific instrumentation, methods and data systems
Published
2026-11-16
DOI
https://doi.org/10.5194/gi-15-323-2026
Primary Topic
Precipitation Measurement and Analysis
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

An adjustable-rate user-printable rain gauge calibrator

John Steven Selker, Matthew Tippett-Vannini, Aiden Hosford, Paul Gaspar
1 links
Geoscientific instrumentation, methods and data systems
Precipitation Measurement and Analysis
article

An adjustable-rate user-printable rain gauge calibrator

John Steven Selker, Matthew Tippett-Vannini, Aiden Hosford, Paul Gaspar
article en

Abstract

Accurate precipitation measurement is essential. However, calibration of field-deployed rain gauges remains a challenge. Many methods require laboratory conditions, costly commercial equipment, or instruments designed for specific rain gauges, which cannot accommodate smaller-diameter gauges. We introduce the Adjustable-Rate 3D Printed Rain Gauge Calibrator (AR3D) , a low-cost, open-source device designed for in situ calibration of rain gauges. The AR3D introduces three innovations: (1) an adjustable screw valve, enabling flow rate tuning from 0.15–16 mL min −1 (equivalent rainfall rates 1.3–141.2 mm h −1 , for a 9.3 cm diameter gauge), accommodating the lower flow rates needed for smaller rain gauges and allowing for validation across a wide range of rainfall rates; (2) a compact and durable design developed with low-volume reservoirs and elimination of degradable parts; and (3) an integrated pyranometer cover to generate automatic calibration event signals. We evaluated the AR3D using gravimetric tests, constant-rate stability tests, device-to-device equivalence tests, and field comparisons. Laboratory gravimetric tests of the AR3D demonstrate its ability to deliver volumes of water accurately with an average error of 0.11 % (comparable to ISO Class B tolerances for plastic volumetric flasks) at flow rates within ±5 % equivalence across independent devices, with a coefficient of variation (CV) below 5 %. The AR3D has been successfully deployed to weather stations in Kenya and the United States. Field validation of the AR3D with a single setting resulted in a flow rate CV of 8.7 %. The AR3D enabled the identification of properly functioning rain gauges, as well as an under-reporting station. The total cost of material and labor to build an AR3D is approximately USD 12.

Geoscientific instrumentation, methods and data systemsVol. 15(2)
Oregon State University (US)
Precipitation Measurement and Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon