Real-time estimates of the ICRF single-pass absorption for ITER

Estimating the single-pass absorption (SPA) of a given Ion Cyclotron Resonance Heating (ICRH) scenario as function of the plasma and the radio-frequency (RF) wave properties requires a multispecies hot plasma wave solver. Even in 1D and using truncated finite Larmor radius expansion for the plasma dielectric response, the simulations cannot be done much faster than in a couple of seconds. In ITER, it is envisaged to estimate the single-pass absorption of the ICRF waves in real-time to take preventive actions in case of poor absorption for avoiding increased plasma-wall interaction and enhanced heat loads on the plasma facing components. This work proposes a potential solution based on pre-calculated look-up tables of the ICRF single-pass absorption that can be interpolated in real-time by the Advanced Protection System (APS) and by the Plasma Control System (PCS) in ITER [<ns0:underline>1,2,3</ns0:underline>] during the discharge evolution. The tables can also be used as input for the Pulse Design Simulator (PDS) [<ns0:underline>4</ns0:underline>] and other modelling tools that require the ICRF absorption information for control and/or protection. The SPA tables are produced as function of the dominant parameters governing the RF wave propagation and absorption using the 1D TOMCAT code [<ns0:underline>5</ns0:underline>] for some ITER-relevant ICRH scenarios.