A Simulation Model for Common-Mode Mechanical Ventilation Data Generation: Integrating Anthropometric and Disease Parameters for Fully Sedated Patients

Background: A patient’s lung condition can be estimated using mechanical ventilation waveform data. These procedures are often labour-intensive and error-prone, especially during large-scale health crises, leading to infrequent executions. Automated diagnostic techniques in healthcare are currently limited by the lack of large, labelled datasets required for effective machine learning applications. Analytical modelling of the mechanical ventilator-patient (MV-P) system is complex, and existing models fail to fully integrate adjustable parameters for patient, ventilation, and disease conditions. Methods: This article presents an expanded system model developed in MATLAB® Simulink®. The model accommodates adjustments to anthropometric parameters, ventilator settings for the three most common modes in ICU sedation, and disease progression simulations. Other uniquely combined aspects include the ability to perform an end-inspiratory hold manoeuvre and per-breath optimisation of PI control parameters. Results: The system has been validated against clinical techniques, compared to real-world data, and verified with accuracy within 3% and average normalised standard deviation of 3.4% for all adjustable parameters. Conclusions: Based on this model, which introduces high-fidelity disease progression modelling, a fully labelled synthetic dataset of nearly 2M breaths over a range of health conditions was generated. This addresses the critical shortage of labelled data needed for developing early proof-of-concept, resource-efficient diagnostic tools for automatically estimating lung conditions.