In Situ Analysis of Surface Properties, Supersaturation, and Solution Density Effects on Aqueous KNO3 Incrustation in a Cooling Crystallization Process

The incrustation process represents a significant industrial challenge that affects various aspects of crystallization systems. It proceeds through successive stages, beginning with the induction period. This is followed by a transport phase, in which additional crystals are generated and sustained by overall supersaturation and the presence of seed crystals, leading to further attachment to surfaces. Ultimately, the process progresses to crystal removal and aging stages. In this study, a 1.2 dm3 thermostated crystallizer was utilized to investigate the incrustation phenomenon of potassium nitrate (KNO3). Deposits formed on three smooth and artificially roughened wall-surfaces, i.e., stainless steel (Type 316), copper, and acrylic, were examined. Contact angle measurements were conducted for all surfaces. The experiments covered a saturation temperature range of 303.15–333.15 K (±0.01 K) for various KNO3 solution concentrations between 5.0 and 60.0% w/w. The results show that deposit adhesion is stronger on rough surfaces than on smooth ones, and that the induction period for incrustation is shorter on rougher surfaces. Moreover, the influence of surface wettability and contact angle on incrustation becomes more pronounced at higher degrees of surface roughness. This highlights the coupled role of surface properties and thermal control in governing incrustation behavior.