The Effects of Cr and Mo Additions on the Corrosion Behavior of Fe–Al Alloys in 0.5 M H2SO4 and 3.5 wt.% NaCl Aerated Aqueous Solutions

This study aims to investigate the effects of Cr and Mo added to Fe-Al alloys on their corrosion behavior in acidic and chloride-containing environments. Corrosion tests were carried out in 0.5 M H₂SO₄ and 3.5 wt.% NaCl aerated aqueous solutions. X-ray diffraction analyses reveal that all alloys exhibited predominantly body-centered cubic structures in the homogenized states. In the 0.5 M H₂SO₄ solution, the addition of Cr can effectively reduce the critical current density; however, the anodic and cathodic polarization curves still intersected three times, similar to the alloy without the addition of Cr, resulting in three corrosion potentials. With the further addition of Mo, the critical current density became much lower, leading to a single corrosion potential. In the 3.5 wt.% NaCl solution, the addition of Cr alone markedly improved the pitting resistance of Fe-Al alloys, while the further addition of Mo broadened the passive region and increased the pitting potential. The analysis of ion concentrations was consistent with the potentiodynamic polarization results, verifying the stabilization of Mo on the passive film. It is evident that the addition of Cr promotes passivation of the Fe-Al alloy, and the further incorporation of Mo enhances this effect even more significantly. The related corrosion mechanisms are discussed with Nerst equations of metal-metal oxides and their solubility products (K_sp).