Photophysical Properties and Phase Behavior of Ultrawide Photovoltaic Bandgap Cesium–Lead-Based Triple Halide Perovskites

Metal halide perovskite films in the top cell of triple-junction tandems require bandgaps around 2.0 eV to achieve current matching, assuming that the middle absorbing layer is the commonly used FAPbI3 composition and the bottom cell has a bandgap around 1.1 eV. Unfortunately, mixed organic/inorganic metal halide perovskites that have the necessary Br content to reach a bandgap of 2.0 eV segregate into iodine-rich and bromine-rich phases under illumination, limiting their obtainable voltage. Previous reports have shown improved photostability using either Cs-based inorganic compositions or Cl incorporation on the X-site. Here, we investigate the inorganic triple halide compositional space CsPb(I1–x–yBryClx)3 where bandgaps near 2.0 eV are expected based on the knowledge that CsPbI2Br has a bandgap of 1.90 eV. Incorporation of Cl occurs readily for x ≤ 0.07–0.10 within perovskites with a Br content of 0.3 ≤ y ≤ 0.42. When x >0.1, X-ray diffraction and photoluminescence (PL) measurements indicate that multiple compositional phases form. We hypothesize that the variable sizes of the three halide ions are not supported within the rigid Cs lattice, resulting in the formation of multiple compositional phases. The photoluminescence quantum yield of the single-phase compositional space─CsPb(I1–x–yBryClx)3 where x ≤ 0.07─was typically 0.001–0.004%, most likely as a result of a high defect density, including mobile iodine species. PL light-soaking measurements of many perovskite compositions with bandgaps in the range of 1.89–2.05 eV demonstrate that phase segregation occurs when initial bandgaps are above 1.95 eV regardless of halide content: indicating further iodide oxidation and corresponding migration under illumination. The conclusion is that further compositional or additive engineering is necessary for the development of inorganic triple halide compositions that accomplish the elusive goal of fabricating high-quality and photostable 2.0 eV films for use in multijunction tandems.