Effect of Replacement of Ni by Ta on Glass-Forming Ability, Crystallization Kinetics, Mechanical Properties, and Corrosion Resistance of Zr–Cu–Al–Ni Amorphous Alloys

In this study, bulk metallic glasses (BMGs) of Zr₅₆Cu₂₃Al₁₀Ni_11-<i>x</i>Ta<i>_x</i> (<i>x</i> = 0, 0.5, 1, 1.5, 2, and 2.5 at.%) were prepared by copper mold suction-casting. The glass-forming ability, mechanical properties, crystallization kinetics, and corrosion resistance of the as-obtained amorphous alloys were all investigated. Experimental results showed enhanced forming ability of amorphous alloys in the presence of small amounts of Ta element. By adding appropriate amounts of Ta, the supercooled liquid region of bulk metallic glass increased from 64 K to 73 K. The critical diameter of the alloy rod at x = 1, 1.5 rose from 5 mm to 6 mm. The addition of Ta also reduced the sensitivity coefficients of the amorphous alloys to the heating rate during crystallization, while other quantities, like E<i>g</i>, E<i>x</i>, and E<i>p</i>, all incremented. Thus, the addition of Ta declined the temperature sensitivity of amorphous alloy systems. This also increased the energy barrier required for atom rearrangement, nucleation and growth, as well as greatly enhancing the stability of the systems. At 2% Ta content, the plastic strain of the amorphous alloy exceeded 2.6%, and yield strength reached 1900 MPa. In sum, the mechanical properties of the amorphous alloys after the addition of Ta element obviously improved when compared to the original alloy. As Ta content raised, the corrosion current densities of BMGs in different corrosion solutions gradually decreased, while the corrosion potential gradually increased.