Performance Enhancement of Latent Heat Storage Using Extended-Y-Fin Designs

The low thermal conductivity of phase-change materials (PCMs) remains a key limitation in latent heat thermal energy storage systems, leading to slow melting and incomplete energy recovery. To address this challenge, this study explores extended Y-Fin geometries as a novel heat transfer enhancement strategy within a concentric-tube latent heat thermal energy storage configuration. Six fin designs, derived from a baseline Y-shaped structure, were numerically compared to assess their influence on the melting and solidification behavior of stearic acid. A two-dimensional transient enthalpy–porosity model was developed and rigorously verified through grid, temporal, and residual convergence analyses. The results indicate that fin geometry plays a critical role in enhancing heat transfer within the PCM domain. The extended Y-Fin configuration achieved the fastest melting time, 28% shorter than the baseline Y-Fin case, due to improved thermal penetration and bottom-region accessibility. Additionally, the thermal performance was evaluated using nano-enhanced PCMs (10% Al2O3 and CuO in stearic acid) and paraffin wax. The addition of Al2O3 nanoparticles significantly improved thermal conductivity, while paraffin wax exhibited the shortest melting duration due to its lower melting point and latent heat. This study introduces an innovative fin architecture combining extended conduction paths and improved convective reach for efficient latent heat storage systems.