Photodynamic Decontamination of Food: Assessing Surface Challenges Against Listeria monocytogenes

<i>Listeria monocytogenes</i> is a foodborne pathogen of significant concern. While it typically causes mild, self-limiting gastroenteritis, it poses a much higher threat to immunocompromised individuals and pregnant women, where it may lead to miscarriage. Numerous outbreaks have been linked to ready-to-eat foods. Although heat treatment is commonly used for microbial decontamination, it is unsuitable for fresh produce such as fruits and vegetables. Other physical (e.g., UV, gamma irradiation) and chemical (e.g., NaOCl, ozone) methods can compromise sensory qualities or face limited consumer acceptance. Photodynamic Inactivation (PDI) has emerged as a promising alternative, particularly when using natural photosensitizers. Because PDI efficacy depends on photosensitizer diffusion, there is a need to further explore how different and complex fruit surface structures may influence its performance. Three fruit models were therefore selected to represent distinct surface textures and were evaluated in situ: apples (smooth), strawberries (irregular), and kiwis (fuzzy and hairy surface). The influence of contamination order was also evaluated, as this factor is highly relevant to real-world supply-chain scenarios but has been largely overlooked in prior research. Additionally, the study investigated how the order of contamination affected the decontamination outcome. Sodium-magnesium-chlorophyllin (Na-Mg-Chl), an approved food additive (E140), was used as photosensitizer. Fruits were cut into 1 cm<sup>2</sup> squares and inoculated with <i>L. monocytogenes</i>. A 100 µM Na-Mg-Chl solution was applied either before or after bacterial inoculation. All samples were then illuminated using a 395 nm LED (radiant exposure 15 J/cm<sup>2</sup>). When <i>L. monocytogenes</i> was applied first, followed by the addition of Na-Mg-Chl, a 5.96 log reduction was observed in apples, a 5.71 log reduction in strawberries, and a 6.02 log reduction in kiwis. Conversely, when Na-Mg-Chl was applied prior to bacterial deposition, apples showed a 5.61 log reduction, strawberries demonstrated a 6.34 log reduction, and kiwis achieved the highest inactivation, at 6.74 log units. These results indicate that PDI consistently achieved substantial bacterial reductions across all fruit types, regardless of surface characteristics or application order. This supports PDI as a powerful method for fruit surface decontamination, reducing public health risks and economic losses while preserving product quality and consumer confidence.

Authors

Institutions

Publication Details

Journal
Microorganisms
Published
2025-12-26
DOI
https://doi.org/10.3390/microorganisms14010059
Primary Topic
Listeria monocytogenes in Food Safety
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Photodynamic Decontamination of Food: Assessing Surface Challenges Against Listeria monocytogenes

Michael Fefer, Kristjan Plaetzer, Anabel Cenit, Jun Liu
Microorganisms
Listeria monocytogenes in Food Safety
article

Photodynamic Decontamination of Food: Assessing Surface Challenges Against Listeria monocytogenes

Michael Fefer, Kristjan Plaetzer, Anabel Cenit, Jun Liu
article en

Abstract

<i>Listeria monocytogenes</i> is a foodborne pathogen of significant concern. While it typically causes mild, self-limiting gastroenteritis, it poses a much higher threat to immunocompromised individuals and pregnant women, where it may lead to miscarriage. Numerous outbreaks have been linked to ready-to-eat foods. Although heat treatment is commonly used for microbial decontamination, it is unsuitable for fresh produce such as fruits and vegetables. Other physical (e.g., UV, gamma irradiation) and chemical (e.g., NaOCl, ozone) methods can compromise sensory qualities or face limited consumer acceptance. Photodynamic Inactivation (PDI) has emerged as a promising alternative, particularly when using natural photosensitizers. Because PDI efficacy depends on photosensitizer diffusion, there is a need to further explore how different and complex fruit surface structures may influence its performance. Three fruit models were therefore selected to represent distinct surface textures and were evaluated in situ: apples (smooth), strawberries (irregular), and kiwis (fuzzy and hairy surface). The influence of contamination order was also evaluated, as this factor is highly relevant to real-world supply-chain scenarios but has been largely overlooked in prior research. Additionally, the study investigated how the order of contamination affected the decontamination outcome. Sodium-magnesium-chlorophyllin (Na-Mg-Chl), an approved food additive (E140), was used as photosensitizer. Fruits were cut into 1 cm<sup>2</sup> squares and inoculated with <i>L. monocytogenes</i>. A 100 µM Na-Mg-Chl solution was applied either before or after bacterial inoculation. All samples were then illuminated using a 395 nm LED (radiant exposure 15 J/cm<sup>2</sup>). When <i>L. monocytogenes</i> was applied first, followed by the addition of Na-Mg-Chl, a 5.96 log reduction was observed in apples, a 5.71 log reduction in strawberries, and a 6.02 log reduction in kiwis. Conversely, when Na-Mg-Chl was applied prior to bacterial deposition, apples showed a 5.61 log reduction, strawberries demonstrated a 6.34 log reduction, and kiwis achieved the highest inactivation, at 6.74 log units. These results indicate that PDI consistently achieved substantial bacterial reductions across all fruit types, regardless of surface characteristics or application order. This supports PDI as a powerful method for fruit surface decontamination, reducing public health risks and economic losses while preserving product quality and consumer confidence.

MicroorganismsVol. 14(1)
Suncor Energy (Canada) (CA), University of Salzburg (AT), Fachhochschule Salzburg (AT)
Suncor Energy Incorporated, Universität Salzburg
Openalex Percentile: Top 31%
Listeria monocytogenes in Food Safety
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.