Recovery of Fe, Pb and Zn from Blast Furnace Gas Ash by Intensive Calcination and Magnetic Separation Techniques

Intensive calcination, selection and metallurgical joint comprehensive utilization of solid waste blast furnace gas ash generated by a Chinese iron and steel plant. The main valuable elements in the gas ash are Fe, Pb, Zn, and C, with contents of 22.46%, 3.22%, 10.57%, and 27.02%, respectively. The iron minerals are mainly magnetite and hematite/limonite. Lead exists primarily in the form of lead vanadate and basic lead chloride. Zinc is associated with oxygen, sulfur, and iron in the form of zinc ferrite crystals. The effects of calcination temperature, calcination time, and reducing agent dosage on gasification and reduction indices were investigated. Results showed that using a gasification and reduction calcination–magnetic separation process with weak magnetism, at a calcination temperature of 1150 °C, with 20% anthracite as the reducing agent and a calcination time of 2 h, the volatilization rates of lead and zinc reached 96.70% and 98.26%, respectively. When the roasted ore was ground to a particle size of D90 = 0.085 mm, high-quality iron concentrate with 65.61% iron grade and low lead and zinc contents of 0.08% and 0.17% was obtained, meeting the quality requirements for iron concentrate. The tailings from iron selection can be used as additives in cement and other construction materials. This integrated process combining pyrometallurgy and mineral processing enables the efficient and comprehensive utilization of blast furnace gas dust.