Novel Filter-Based Excitation Method for Pulse Compression in Ultrasonic Sensory Systems

Location-based services (LBSs) and positioning systems have spread worldwide due to the emergence of Internet of Things (IoT) and other application domains that require real-time estimation of the position of a person, tag, or asset in general in order to provide users with services and apps with added value. Whereas Global Navigation Satellite Systems (GNSSs) are well-established solutions outdoors, positioning is still an open challenge indoors, where different sensory technologies may be considered for that purpose, such as radio frequency, infrared, or ultrasounds, among others. With regard to ultrasonic systems, previous works have already developed indoor positioning systems capable of achieving accuracies in the range of centimeters but limited to a few square meters of coverage and severely affected by the Doppler effect coming from moving targets, which significantly degrades the overall positioning performance. Furthermore, the actual bandwidth available in commercial transducers often constrains the ultrasonic transmission, thus reducing the position accuracy as well. In this context, this work proposes a novel excitation and processing method for an ultrasonic positioning system, which significantly improves the transmission capabilities between an emitter and a receiver. The proposal employs a superheterodyne approach, enabling simultaneous transmission and reception of signals across multiple channels. It also adapts the bandwidths and central frequencies of the transmitted signals to the specific bandwidth characteristics of available transducers, thus optimizing the system performance. Binary spread spectrum sequences are utilized within a multicarrier modulation framework to ensure robust signal transmission. The ultrasonic signals received are then processed using filter banks and matched filtering techniques to determine the Time Differences of Arrival (TDoA) for every transmission, which are subsequently used to estimate the target position. The proposal has been modeled and successfully validated using a digital twin. Furthermore, experimental tests on the prototype have also been conducted to evaluate the system's performance in real scenarios, comparing it against classical approaches in terms of ranging distance, signal-to-noise ratio (SNR), or multipath effects. Experimental validation demonstrates that the proposed narrowband scheme reliably operates at distances up to 40 m, compared to the 34 m limit of conventional wideband approaches. Ranging errors remain below 3 cm at 40 m, whereas the wideband scheme exhibits errors exceeding 8 cm. Furthermore, simulation results show that the narrowband scheme maintains stable operation at SNR as low as -32 dB, whereas the wideband one only achieves up to -17 dB, highlighting the significant performance advantages of the proposed approach in both experimental and simulated scenarios.