Удосконалення методу визначення просторових параметрів математичної моделі розподіленої автоматизованої інформаційно-вимірювальної системи оперативного контролю якості залізорудної сировини

This study investigates processes of irradiating iron ore raw materials by a source of low-energy gamma quanta and registering radiation scattered as a result of the Compton effect, as well as parameters of the irradiation geometry. This work addressed the task of improving the accuracy of existing nuclear-physical methods of control over the quality of iron ore raw materials, which make it possible to promptly determine the material composition of the crushed rock mass. The results essentially indicate that when using a centrally shifted irradiation geometry, the sensitivity of registration of the integral backscatter flux increases compared to the side and central irradiation geometries. This is attributed to improved visibility conditions of the detector, and the formation of a scattering angle close to the optimal. The constructed mathematical model has made it possible to identify the main geometric parameters for the system of operational control over the quality of iron ore raw materials. A formula has been derived that connects the basic parameters in the system of operational control over iron content in ore with the use of centrally shifted irradiation geometry. The studies demonstrated changes in the sensitivity of the registration of the integral backscatter flux when changing the vertical location of the gamma-ray source. The results revealed a maximum sensitivity with a value of 6.08·10-7 at a minimum distance of the radiation source from the single crystal and a distance of 110 mm from the irradiated surface. The value of the correlation coefficient between the model and experimental data is 0.981. The findings could be practically applied to improve the accuracy of methods for operational control over the content of a usable component in iron-containing ores under industrial conditions at ferrous metallurgy enterprises

Authors

Institutions

Publication Details

Journal
The Scientific Issues of Ternopil Volodymyr Hnatiuk National Pedagogical University Series pedagogy
Published
2025-12-23
Primary Topic
Graphite, nuclear technology, radiation studies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Удосконалення методу визначення просторових параметрів математичної моделі розподіленої автоматизованої інформаційно-вимірювальної системи оперативного контролю якості залізорудної сировини

Альберт Арамаїсович Азарян, Аннаіт Альбертівна Трачук, Олексій Володимирович Черкасов, Дмитро Валерійович Швець et al.
The Scientific Issues of Ternopil Volodymyr Hnatiuk National Pedagogical University Series pedagogy
Graphite, nuclear technology, radiation studies
article

Удосконалення методу визначення просторових параметрів математичної моделі розподіленої автоматизованої інформаційно-вимірювальної системи оперативного контролю якості залізорудної сировини

Альберт Арамаїсович Азарян, Аннаіт Альбертівна Трачук, Олексій Володимирович Черкасов, Дмитро Валерійович Швець, Олександр Василійович Швидкий, Андрій Миколайович Гриценко
article en

Abstract

This study investigates processes of irradiating iron ore raw materials by a source of low-energy gamma quanta and registering radiation scattered as a result of the Compton effect, as well as parameters of the irradiation geometry. This work addressed the task of improving the accuracy of existing nuclear-physical methods of control over the quality of iron ore raw materials, which make it possible to promptly determine the material composition of the crushed rock mass. The results essentially indicate that when using a centrally shifted irradiation geometry, the sensitivity of registration of the integral backscatter flux increases compared to the side and central irradiation geometries. This is attributed to improved visibility conditions of the detector, and the formation of a scattering angle close to the optimal. The constructed mathematical model has made it possible to identify the main geometric parameters for the system of operational control over the quality of iron ore raw materials. A formula has been derived that connects the basic parameters in the system of operational control over iron content in ore with the use of centrally shifted irradiation geometry. The studies demonstrated changes in the sensitivity of the registration of the integral backscatter flux when changing the vertical location of the gamma-ray source. The results revealed a maximum sensitivity with a value of 6.08·10-7 at a minimum distance of the radiation source from the single crystal and a distance of 110 mm from the irradiated surface. The value of the correlation coefficient between the model and experimental data is 0.981. The findings could be practically applied to improve the accuracy of methods for operational control over the content of a usable component in iron-containing ores under industrial conditions at ferrous metallurgy enterprises

The Scientific Issues of Ternopil Volodymyr Hnatiuk National Pedagogical University Series pedagogy
Kryvyi Rih National University (UA)
Openalex Percentile: Top 48%
Graphite, nuclear technology, radiation studies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.