Numerical Simulation Study on Combustion Flame Performances of a Diffusion Burner

ANSYS-Fluent was applied to simulate diffusion combustion flame in a two-dimensional (2D) industrial burner to determine the contours of the mass fraction of gas emissions, velocity, and combustion temperature. The effects of the boundary conditions, including momentum, thermal, and species (inlet air, inlet fuel, and outlet pressure) on combustion temperature and mass fraction (gas emissions) were analyzed in the designed burner. The present study focused on using and analyzing the volumetric reaction and the turbulence-chemistry interaction of the eddy dissipation model for the diffusion flame model. The simulation used the discrete ordinate model and p1 for radiation and the k-ε model for turbulence with enhanced wall treatment. Based on the results, the magnitude velocities of air and fuel, inlet temperature, and mass fractions of oxygen and inert gas can influence the parameters of flame temperature and gas emissions in the industrial burner. The flame shape for all the cases of inlet velocity was predominantly symmetric about the x = 0 mm for all the axial distances towards the outlet. The radial velocity contour at 0.01 m/s (300 K) gave better results with an area of 1.31 m/s to 4.08 m/s, which was wider than that of the case at 0.01 m/s (700 K). By varying the inlet temperature and oxygen mass fraction, the flame configurations on temperature, CO2, and H2O formed a symmetric flame structure. The temperature distribution resulted in the centerline being hotter than other radial positions for all of the inlet temperatures. The emissions of CO2 and H2O generally increased with the addition of the oxygen mass fraction.