Walking Capacity in Parkinson’s Disease: Test–Retest Reliability of the 6-min Walk Test on a Non-Linear Circuit

<b>Background/Objectives:</b> The 6 min walk test (6MWT) has been used to measure the level of walking capacity in people with Parkinson's disease (PD). However, the use of a non-linear circuit has not yet been investigated deeply. Thus, the aim of this study was to evaluate the test-retest reliability of the 6 min walk test in a rectangular circuit in people with PD. <b>Methods:</b> Forty-two people with PD (men = 27, women = 15), mean age 66 ± 9.61 years, participated. All of them were in ON state. Each patient performed the 6MWT on 2 test days separated by 1 week, walking at a constant speed on a 20 m × 3.5 m circuit. Test-retest reliability was assessed using the intraclass correlation coefficient (ICC), minimal detectable change (MDC), and standard error of measurement (SEM), and Student's <i>t</i>-test was applied to determine whether there were statistically significant differences between the test and the retest. <b>Results:</b> The ICC values for the total sample were excellent (>0.90) in both men and women. In addition, they had similar reliability, although slightly higher in women. The results showed that, for the total sample, a MDC < 17% can be considered as a true change for this procedure. The SEM percentage was 6.1%. <b>Conclusions:</b> The 6MWT, performed on a rectangular circuit, demonstrated excellent test-retest reliability in patients with Parkinson's disease.