Dual-Bifurcation Model and Numerical Analysis of Driving Forces on the Keyhole Boundary in Variable Polarity Plasma Arc Welding

Molten pool flow and keyhole status during Variable Polarity Plasma Arc (VPPA) welding directly affect the weld quality and stability. The lack of a clear correlation between them, however, prevents this process approach from being developed further. To investigate the keyhole morphology and liquid metal flow, the experimental examination of fluid flow by the X-ray imaging method and numerical simulation of plasma arc under the effect of the keyhole were carried out. By changing the tungsten electrode setback while keeping all other parameters, it is possible to vary the keyhole status and maintain the consistency of heat input to the base metal. This work establishes a dual-bifurcation flow model to characterize the keyhole molten pool, where the bifurcation point on the keyhole rear wall significantly affects the stability of the keyhole molten pool. The rear wall of the keyhole is divided into three sections from top to bottom, with the arc pressure in the middle section being significantly higher than in the upper and lower sections. As the degree of arc constriction increases—i.e., as arc stiffness or arc force increases—the middle section becomes more vertical. By the calculated distribution of driving forces, the arc pressure has a high possibility of being one of the dominances for the metal flow in keyhole welding of aluminum alloys. Arc pressure is also important for the bifurcation point position, which is closely related to the three welding states: blind keyhole, keyhole, and cutting.