Effects of Phosphogypsum–Recycled Aggregate Solid Waste Base on Properties of Vegetation Concrete

Vegetation concrete is a composite material integrating plant growth and concrete technology. In this study, solid waste materials (phosphogypsum and recycled aggregates) were utilized to prepare vegetation concrete. Semi-hydrated phosphogypsum (HPG) was used to replace ordinary Portland cement as a cementitious material in a gradient manner, while recycled coarse aggregates (RCAs) fully replaced natural crushed stone. The basic properties of phosphogypsum-recycled aggregate-based vegetation concrete were analyzed, and X-ray diffraction (XRD) and scanning electron microscopy (SEM) were employed to characterize the hydration products of vegetation concrete with different mix ratios. The results indicated that replacing cement with HPG exerted a significant alkali-reducing effect and provided favorable cementitious strength. When the porosity was 24% and the HPG content was 50%, the vegetation concrete exhibited optimal performance: the 28-day compressive strength reached 12.3 MPa, and the pH value was 9.7. Recycled aggregates had a minimal impact on strength. When 0.5% sodium gluconate was added as a retarder, the initial setting time was 97 min and the final setting time was 192 min, which met construction requirements with little influence on later-stage strength. Microscopic analysis revealed that the early strength (3d-7d) of vegetation concrete was primarily contributed by CaSO₄·2H₂O crystals (the hydration product of HPG), while the later-stage strength was supplemented by C-S-H (the hydration product of cement). Planting tests showed that Tall Fescue formed a lawn within 30 days; at 60 days, the plant height was 18 cm and the root length was 6-8 cm. Some roots grew along the sidewalls of concrete pores and penetrated the 5 cm thick vegetation concrete slab, demonstrating good growth status.