High-Specific-Impulse Electrospray Propulsion with Small Capillary Emitters

This study demonstrates the feasibility of using smaller capillary emitters to achieve higher specific impulse ([Formula: see text]) in electrospray propulsion. Four ionic liquids were characterized using capillary emitters with tip diameters from [Formula: see text]. Smaller-diameter capillaries produced smaller and more stable Taylor cones. This stabilization enabled steady cone-jet operation at significantly lower flow rates compared to larger emitters. This was unexpected because when the jet diameter is much smaller than far-field geometric features, the minimum flow rate is thought to be solely determined by the physical properties of the propellant. Using the smaller emitters and acceleration voltages of 1.5 kV, specific impulses up to 1100 s can be achieved with efficiencies above 50%, approximately doubling the [Formula: see text] observed with larger emitters. For one of the liquids and the smallest emitters, the beam consisted solely of ions at the lowest flow rates, similarly to studies using externally wetted and porous emitters. Another important finding was that at sufficiently low flow rates, a significant fraction of the propellant fed to the emitter is not accelerated by the electrostatic field. These propellant losses make the time-of-flight technique unreliable for determining the [Formula: see text].