Quality Assessment of Quercus scytophylla Liebm Charcoal Produced in a Metal Kiln in the Cordón Grande Ejido, Guerrero, Mexico
The present study evaluates the quality of charcoal produced from Quercus scytophylla Liebm. in Guerrero, Mexico, using a portable metal oven, namely, the Guadiana Valley Experimental Field (CEVAG) type. A 2×3 factorial design was employed to analyse the influence of wood heterogeneity (sapwood vs. heartwood) and position within the oven (low, medium, high) on the yield and physicochemical properties of the charcoal. The mean yield of the process was found to be 20.0–26.7%. The characteristics of six properties were determined: moisture content, volatile matter, ash content, fixed carbon, basic density, and calorific value. The charcoal exhibited a low moisture content (1.49–3.56%) and ash content (2.18–2.52%), meeting international standards. Volatile matter was higher in heartwood (22%). Fixed carbon (73.73–74.05%) was close to the optimal parameters of international standards. The calorific value exhibited marked variations in accordance with the position during the process of carbonisation, with elevated values observed in the lower section (6751–7508 cal g−1). The basic density of the wood was higher in the sapwood, with a maximum value of 0.57 g cm−3 observed in the upper section. A positive linear relationship was identified between the basic density and calorific value, although the coefficient of determination was small (R2=0.67) and therefore inconclusive. The analysis showed the type of relationship that can be established between these two variables. The upper part of the kiln exhibited the optimal physicochemical properties, with the levels deemed acceptable. The utilisation of this oak for charcoal production fosters sustainable forest management and engenders direct economic benefits for rural communities. In conclusion, the research provides a viable technical model for sustainable wood energy production in forestry regions and underscores the need to evaluate other timber species with this potential.
Institutions
- Universidad Autónoma de Guerrero (MX)
- Chapingo Autonomous University (MX)
- Dirección de Investigación y Desarrollo (CL)
Publication Details
- Journal
- Forests
- Published
- 2025-12-18
- DOI
- https://doi.org/10.3390/f16121877
- Primary Topic
- Wood Treatment and Properties
- Type
- article
- Field-Weighted Citation Impact
- 0.00