Behavior of Nonconforming Flexure-Controlled RC Structural Walls Under Reversed Cyclic Lateral Loading

Reinforced concrete (RC) structural walls are essential for ensuring adequate lateral stiffness and strength in buildings located in seismic regions. However, many older structures incorporate nonconforming walls constructed with low-strength concrete, plain longitudinal reinforcement, and insufficient boundary confinement, and experimental data on such systems remain limited. This study investigates the seismic performance of two full-scale, relatively slender nonconforming RC wall specimens representative of older construction: one with no boundary confinement (SW-NC-FF) and one with insufficient confinement (SW-IC-FF). Both specimens exhibited flexure-controlled behavior, with initial yielding of boundary longitudinal bars occurring at an approximately 0.30% drift ratio and maximum reinforcement tensile strains of 0.006 (SW-IC-FF) and 0.015 (SW-NC-FF). Rocking governed the lateral response due to progressive debonding of the plain bars along the wall height, producing pronounced pinching and self-centering behavior. Failure occurred through longitudinal bar buckling and concrete crushing, with ultimate drift ratios of 2.0% and 1.5% and displacement ductility values of 4.0 and 4.3 for SW-IC-FF and SW-NC-FF, respectively. Experimental results were compared with backbone predictions from ASCE 41:2023, NZ C5:2025, and EN 1998-3:2025. While all three guidelines captured initial stiffness and yield rotations, their rotation-capacity predictions diverged, underscoring the need for improved assessment approaches for rocking-dominated, plain-reinforced walls.