(All-in-One) Open Source Potentiostat for Field Analysis Based on Raspberry Pi

Field instruments are an emerging topic because they facilitate the extraction of qualitative and quantitative information from samples at a sampling site. This work focused on the development of an open-source potentiostat, analyzing the construction feasibility and quality of a lab-made device with an all-in-one design, low cost, good response, and portability, compared to expensive, commercial, laboratory-oriented devices. The design and development of the hardware, as well as the corresponding software, was considered, allowing the device to be expandable in the future through upgrades. Thus, an economical and portable functional prototype was developed, with good linear response and the capacity to perform, in this first approach, cyclic, square wave, and stripping voltammetry with a range and sweep speed between ±2.048 V and 1000 mV/s, respectively, with waveform frequencies up to 110 Hz and an accuracy of ±1 nA.