Experimental studies of Single-sided Ventilation for Semi-enclosed models with Horizontal Opening

As a preliminary investigation of the wind-driven purging process for densely built environments through the canopy layer, the ventilation efficiency of standalone semi-enclosed models incorporating a horizontal opening in the roof façade was investigated in the wind tunnel. For comparison, two models with different geometries were constructed, and each model was tested individually. Both models were equipped with replaceable roof covers, enabling the adjustment to the opening size. The ventilation efficiency was evaluated by continuous releasing and sampling of the tracer gas, from which the normalized purging velocity ( PFVn) was derived. Additionally, the flow condition over the opening was monitored using the Laser Doppler Anemometer (LDA). It was found that separation flows from the frontal edge(s) of the model could introduce secondary circulations across large openings, resulting in dramatic increases in PFVn. Both the rectangular prism model and cylinder model possessed higher PFVn compared to prior studies on single-sided ventilation, while close values were observed with cylinder model mounted under the wind tunnel floor. Besides, the vertical distribution of integral length scales of streamwise velocity indicated the stratification feature of separation flows under low-turbulent incoming flow conditions. Measurement results provide validation data for further simulation studies including more detailed structures.