Atomic oxygen densities in parallel plate radio frequency driven He/O2 micro-scaled atmospheric pressure plasma jets: a systematic model validation study

Reactive species produced by atmospheric pressure plasma jets have high application potential in the fields of biomedicine and surface processing. An extensive validation between the simulation results in this work and measurement data from various research groups is carried out in order to reliably understand the complicated chemical kinetics defining the reactive species densities. Atomic oxygen densities in parallel plate radio frequency driven He/O2 micro-scaled atmospheric pressure plasma jets have been measured in the literature by several research groups with different methods including: two-photon absorption laser induced fluorescence (TALIF) spectroscopy and optical emission spectroscopy-based methods. These measurement data with a variation of the absorbed power, the He gas flow rate and the O2 mixture ratio are simulated in this paper with a plasma-chemical plug-flow model coupled with a two-term Boltzmann equation solver. The simulated atomic oxygen densities are generally in good agreement with the measured ones. Specifically, particularly good agreement is achieved between the simulations and most of the TALIF measurements over a range of operating conditions. The model prediction accuracy relative to a subset of the TALIF measurements is quantified by the percentage error between the measured and simulated atomic oxygen densities. An approximate normal distribution is observed in the histogram plot of the percentage error, and the mean is close to zero. The mean is shifted positively and negatively in the case of removing important atomic oxygen gain and loss channels, which implies the underestimation and overestimation of the simulation results relative to the measurement data, respectively. This indicates that proper incorporation of the dominant reaction channels in the simulations plays a key role in the model prediction accuracy, as expected. The manual analysis of the quantitative influence of the dominant reaction channels on the model prediction accuracy demonstrated in this work provides a basis for further studies on improving plasma-chemical reaction schemes based on systematic comparisons with large experimental data sets.

Publication Details

Journal
White Rose Research Online (University of Leeds, The University of Sheffield, University of York)
Published
2025-09-30
Primary Topic
Plasma Applications and Diagnostics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Atomic oxygen densities in parallel plate radio frequency driven He/O2 micro-scaled atmospheric pressure plasma jets: a systematic model validation study

White Rose Research Online (University of Leeds, The University of Sheffield, University of York)
Plasma Applications and Diagnostics
article

Atomic oxygen densities in parallel plate radio frequency driven He/O2 micro-scaled atmospheric pressure plasma jets: a systematic model validation study

article en

Abstract

Reactive species produced by atmospheric pressure plasma jets have high application potential in the fields of biomedicine and surface processing. An extensive validation between the simulation results in this work and measurement data from various research groups is carried out in order to reliably understand the complicated chemical kinetics defining the reactive species densities. Atomic oxygen densities in parallel plate radio frequency driven He/O2 micro-scaled atmospheric pressure plasma jets have been measured in the literature by several research groups with different methods including: two-photon absorption laser induced fluorescence (TALIF) spectroscopy and optical emission spectroscopy-based methods. These measurement data with a variation of the absorbed power, the He gas flow rate and the O2 mixture ratio are simulated in this paper with a plasma-chemical plug-flow model coupled with a two-term Boltzmann equation solver. The simulated atomic oxygen densities are generally in good agreement with the measured ones. Specifically, particularly good agreement is achieved between the simulations and most of the TALIF measurements over a range of operating conditions. The model prediction accuracy relative to a subset of the TALIF measurements is quantified by the percentage error between the measured and simulated atomic oxygen densities. An approximate normal distribution is observed in the histogram plot of the percentage error, and the mean is close to zero. The mean is shifted positively and negatively in the case of removing important atomic oxygen gain and loss channels, which implies the underestimation and overestimation of the simulation results relative to the measurement data, respectively. This indicates that proper incorporation of the dominant reaction channels in the simulations plays a key role in the model prediction accuracy, as expected. The manual analysis of the quantitative influence of the dominant reaction channels on the model prediction accuracy demonstrated in this work provides a basis for further studies on improving plasma-chemical reaction schemes based on systematic comparisons with large experimental data sets.

White Rose Research Online (University of Leeds, The University of Sheffield, University of York)
Openalex Percentile: Top 33%
Plasma Applications and Diagnostics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.