Study on the Dynamic Mechanical Properties of Polypropylene Fiber-Reinforced Concrete Based on a 3D Microscopic Model

Polypropylene (PP) fibers, known for their high fracture strength, low density, and cost-effectiveness, can significantly enhance the impact resistance of concrete, making the material suitable for specialized engineering applications. This study combined Split Hopkinson Pressure Bar (SHPB) tests with a three-dimensional mesoscale numerical model to investigate the dynamic compressive behavior of PP fiber-reinforced concrete (PFRC). The model, developed using MATLAB, explicitly represented polyhedral aggregates, mortar, the interfacial transition zone (ITZ), and PP fibers. Numerical simulations of impact compression were then performed using LS-DYNA and validated against experimental results. The simulated results exhibit close agreement with the experimental data in terms of peak stress, peak strain, and failure characteristics. The incorporation of 0.1% polypropylene fibers significantly enhanced the dynamic compressive strength of the specimen by 24.45%, with a mere 2.10% deviation from the experimental measurement. When the impact velocity was increased to 8 m/s and 10 m/s, the peak stress showed increases of 6.14% and 22.62%, respectively, while the peak strain increased by 11.72% and 23.32%. Damage analysis revealed that the aggregates experienced minimal failure, with cracks primarily initiating from the mortar and the ITZ. The polypropylene fibers improved the dynamic mechanical performance by dissipating energy through both fiber fracture and pull-out mechanisms. Furthermore, as the impact velocity increased, the fibers absorbed more energy, leading to a progressive increase in their own damage.