Effect of Yttrium Treatment on Inclusions and Microstructure of High-Strength Peritectic Steel

The morphology and types of inclusion, as well as the microstructure, fundamentally affect the properties of high-strength peritectic steel. Rare earth elements not only modify inclusions but also act on the transformation of the microstructure. In this paper, the evolution mechanism of yttrium for the inclusions and microstructure in high-strength peritectic steel was investigated through experimental testing and thermodynamic analysis. The results show that yttrium treatment can modify the main large-sized irregular inclusions into spherical or near-spherical rare earth inclusions, accompanied by a reduction in the number density, area fraction, average diameter, and aspect ratio of inclusions. The evolution route for the inclusions follows Al2O3 + MnS + Al2O3-MnS→Y2O3 + Y-O-S + Y-S + Y-O-S-MnS with yttrium addition. The microstructural characteristics of yttrium-free steel show significant differences from those of yttrium-containing steel. Compared to yttrium-free steel, the yttrium-0.015 wt.% steel shows a refined austenite structure with more uniform size distribution and the absence of grain boundary ferrite films. The Y2O3 and Y2O2S inclusions mainly formed in liquid steel were found along the austenite grain boundary to prevent the grain growth and the formation of ferrite films. Additionally, after adding rare earth yttrium, the fraction of high-angle grain boundaries (HAGBs) increases, together with a decrease in the fraction of low-angle grain boundaries (LAGBs) in steel. The research results can provide a theoretical basis for the application of adding rare earth yttrium to high-strength peritectic steel.