Beamforming in Interferometer Arrays with Cross-couplings

For an interferometric array, an image of the sky can be synthesized from interferometric visibilities, which are the cross-correlations of the received electric voltages of pairs of array elements. However, to search for transient targets such as the fast radio burst (FRB), it is more convenient to use the beam-forming technique, where the real-time voltage outputs of the array elements are used to generate data streams (beams) which are sensitive to a specific direction. This is usually achieved by a weighted sum of the array element voltages, with the complex weight adjusted so that all outputs have the same phase for that direction. Alternatively, beams can also be formed from the weighted sum of the short time averaged correlation (visibility) data. We shall call these two approaches the electric voltage beam forming (EBF) and cross-correlation beam forming (XBF), respectively. All beams formed with the EBF can also be formed by the XBF method, but the latter can also generate beams which can not be generated by the former. We discuss the properties of these two kinds of beams, and the amount of computation required in each case. For an array with large number of elements, the XBF would require much more computation resource, although this is partly compensated by the fact that it allows integration over time. We study the impact of cross-coupling between array elements on the beamforming, first using a toy model, then for the case of the Tianlai Cylinder Pathfinder Array. In both cases, we find that the impact of the cross-coupling on the beam profile is relatively small. The understanding gained in this study is helpful in designing and understanding the beam-forming FRB digital backend for compact arrays such as the Tianlai array.