The Elastic Vibration Behavior of a Springboard in Gymnastics

The paper presents aspects of the elastic behavior of a springboard in school gyms after contact with a basketball (0.500 kg) falling from a height of 1 m or a volunteer student jumping from 30 or 60 cm in three different areas at the end of the springboard. The results recorded obtained from three accelerometers mounted under the main plate of the springboard are presented, primarily focusing on the accelerations and vertical displacements after contact. The springboard has a special construction, the upper plate and the curved support plates being provided with two pairs of conical and cylindrical truncated helical springs, respectively. The accelerometers were placed at different points, centrally on the upper plate and on the support plates. It was found that in the dynamic process of a body falling on the springboard, the coefficient of elasticity/rigidity of the elastic system changes, presenting values of 22.14–71.12 kN/m. Normally, both accelerations and displacements are greater on the upper plate, but its vibratory motion also induces additional movements and vibrations on the two lower plates. The results may be useful both for manufacturers of such equipment and for coaches to give appropriate instructions to athletes.