Photodegradation of Pyridine in a Fluidized Bed Photocatalytic Reactor Using Pt-ZnO Supported on Al2O3 as a Catalyst

Pyridine is a recalcitrant organic compound present in industrial wastewater that causes severe effects on the environment and the health of living beings, as it is considered a toxic, mutagenic, teratogenic, and carcinogenic agent. Therefore, this research explored the efficacy of a zinc oxide catalyst, doped with platinum nanoparticles and supported alumina through the precipitation method, for the photocatalytic degradation of pyridine using a fluidized bed reactor. A Box–Behnken experimental design was used to analyze the effect of the pH (4–10), the pyridine concentration (20–300 ppm), and the amount of catalyst (20–100 g). The X-ray diffraction (XRD) characterization results confirmed the hexagonal structure of the zinc oxide and the successful incorporation of platinum. Scanning electron microscopy (SEM) revealed a nano-bar morphology upon catalyst doping, favoring the photocatalytic activity. Pyridine removal of 57.7% was achieved under the following conditions: a pH of 4, 160 ppm of pyridine, and 100 g of catalyst. The process followed a pseudo-first-order model, obtaining the reaction constant k1 = 1.943 × 10−3 min−1 and the adsorption constant k2 = 1.527 × 10−3 L/mg. The results showed high efficiency and stability of the catalyst in the fluidized bed reactor for pyridine degradation, especially under acidic conditions, representing a promising technological alternative for treating industrial wastewater contaminated with N-heterocycles such as pyridine.