A PEM Electrolysis Cell for In Operando NMR and MRI Investigations of MEA Degradation

Proton exchange membrane (PEM) electrolysis is a promising process for sustainable hydrogen production, but its commercialization is delayed by high costs and elusive degradation of membrane electrode assemblies (MEAs) [1]. In operando Nuclear Magnetic Resonance (NMR) and Magnetic Resonance Imaging (MRI) offer the potential to investigate degradation mechanisms during electrolysis, and thus, provide highly relevant insights for enhanced performance [2,3]. In a first part of this contribution, a custom-designed miniature PEM electrolysis cell is presented, fitting the spatial constraints of a 1H coil of a commercially available imaging probe. In contrast to tailor-made probes [2,3], this approach allows for a broader range of NMR experiments – including not only 1H spectroscopy and T1 and T2 relaxometry, but also the first MRI and diffusion measurements on operating PEM electrolysis cells. The key design feature was a sealing concept without screws, utilizing O-rings in combination with precise compression geometry. Uniform electrical contacting minimizing metal content in the NMR-sensitive volume was validated via microelectrode voltage mapping. The inlet water temperature was controlled between 60 and 80 °C using a non-magnetic heat tube. The functionality of the newly developed NMR cell is demonstrated by electrochemical and NMR experiments in the second part of the contribution. The 1H signal-to-noise ratio and resolution allowed chemical shift analysis, while T1/T2 contrast enabled differentiation between MEA and water signals. MRI revealed water and gas bubble distribution during operation. Impedance spectroscopy and cyclic voltammetry results were consistent with lab-scale PEM electrolysis. This novel in operando NMR cell provides an effective method for investigating degradation phenomena during long-term PEM electrolysis experiments, leveraging the wide variety of experiments available with commercial probes. References [1] Q. Feng et al., Journal of Power Sources 366, 33 (2017) [2] A. S. Cattaneo et al., Energy & Environmental Science 8, 2383 (2015) [3] C. Mrad et al., Journal of Membrane Science 688, 122111 (2023)

Institutions

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2025-10-01
DOI
https://doi.org/10.5281/zenodo.17244135
Primary Topic
Advanced materials and composites
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

A PEM Electrolysis Cell for In Operando NMR and MRI Investigations of MEA Degradation

Zenodo (CERN European Organization for Nuclear Research)
Advanced materials and composites
article

A PEM Electrolysis Cell for In Operando NMR and MRI Investigations of MEA Degradation

article en

Abstract

Proton exchange membrane (PEM) electrolysis is a promising process for sustainable hydrogen production, but its commercialization is delayed by high costs and elusive degradation of membrane electrode assemblies (MEAs) [1]. In operando Nuclear Magnetic Resonance (NMR) and Magnetic Resonance Imaging (MRI) offer the potential to investigate degradation mechanisms during electrolysis, and thus, provide highly relevant insights for enhanced performance [2,3]. In a first part of this contribution, a custom-designed miniature PEM electrolysis cell is presented, fitting the spatial constraints of a 1H coil of a commercially available imaging probe. In contrast to tailor-made probes [2,3], this approach allows for a broader range of NMR experiments – including not only 1H spectroscopy and T1 and T2 relaxometry, but also the first MRI and diffusion measurements on operating PEM electrolysis cells. The key design feature was a sealing concept without screws, utilizing O-rings in combination with precise compression geometry. Uniform electrical contacting minimizing metal content in the NMR-sensitive volume was validated via microelectrode voltage mapping. The inlet water temperature was controlled between 60 and 80 °C using a non-magnetic heat tube. The functionality of the newly developed NMR cell is demonstrated by electrochemical and NMR experiments in the second part of the contribution. The 1H signal-to-noise ratio and resolution allowed chemical shift analysis, while T1/T2 contrast enabled differentiation between MEA and water signals. MRI revealed water and gas bubble distribution during operation. Impedance spectroscopy and cyclic voltammetry results were consistent with lab-scale PEM electrolysis. This novel in operando NMR cell provides an effective method for investigating degradation phenomena during long-term PEM electrolysis experiments, leveraging the wide variety of experiments available with commercial probes. References [1] Q. Feng et al., Journal of Power Sources 366, 33 (2017) [2] A. S. Cattaneo et al., Energy & Environmental Science 8, 2383 (2015) [3] C. Mrad et al., Journal of Membrane Science 688, 122111 (2023)

Zenodo (CERN European Organization for Nuclear Research)
Forschungszentrum Jülich (DE), RWTH Aachen University (DE)
Responsible consumption and production
Openalex Percentile: Top 52%
Advanced materials and composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.