An on-chip Pixel Processing Approach with 2.4μs latency for Asynchronous Read-out of SPAD-based dToF Flash LiDARs

We propose a fully asynchronous peak detection approach for SPAD-based direct time-of-flight (dToF) flash LiDAR, enabling pixel-wise event-driven depth acquisition without global synchronization. By allowing pixels to independently report depth once a sufficient signal-to-noise ratio is achieved, the method reduces latency, mitigates motion blur, and increases effective frame rate compared to frame-based systems. The framework is validated under two hardware implementations: an offline 256$\times$128 SPAD array with PC based processing and a real-time FPGA proof-of-concept prototype with 2.4$\upmu$s latency for on-chip integration. Experiments demonstrate robust depth estimation, reflectivity reconstruction, and dynamic event-based representation under both static and dynamic conditions. The results confirm that asynchronous operation reduces redundant background data and computational load, while remaining tunable via simple hyperparameters. These findings establish a foundation for compact, low-latency, event-driven LiDAR architectures suited to robotics, autonomous driving, and consumer applications. In addition, we have derived a semi-closed-form solution for the detection probability of the raw-peak finding based LiDAR systems that could benefit both conventional frame-based and proposed asynchronous LiDAR systems.