Fabrication and Characterization of Large Area Flexible Capacitive Pressure Sensors Using PDMS Foam and Functionalized Textile

Flexible capacitive pressure sensors have simple sensing structure, zero-temperature drift, linear response, and high sensitivity, leading to applications in human healthcare including soft and surgical robotics, human machine interaction (HMI) and wearable devices. In this paper, we present a highly compressible multilayer flexible capacitive pressure sensor, based on air/vapour bubble-induced PDMS foam thinfilm as dielectric and polypyrrole coated cotton textile as electrodes. An in-situ chemical oxidative polymerisation method was used to synthesize a conducting, large area polypyrrole coated cotton textile. We used this as parallel electrodes on the top and bottom of the bubble-induced PDMS foam. The bubble-induced PDMS film was made by casting of PDMS, mix with specific amounts of ethanol. The top and bottom textile electrodes were then attached to it with the help of silicone adhesive. We observed low hysteresis, high repeatability, and good step response in our sensor characterisation. Bubble characterisation was also performed including surface profilometer and scanning electron microscopy (SEM). We showcase two applications of our sensor including mouse click and grasping of a cup. The sensor can be fabricated in different shapes and sizes for various applications of free-form electronics such as soft and surgical robotics, wearable, biomedical, human-machine interaction, and so on.