Design of a lightweight and slender hyper-redundant manipulator for underwater applications

• This work presents a design and optimisation approach for a hyper-redundant robot. • It presents the usage of GPR-based stress prediction and generative design. • It proposes a design adaptable to underwater settings. • The aim is to be able to use the proposed manipulator in combination with an ROV. • The work integrates buoyancy strategies and hydrodynamically efficient design. Hyper-redundant manipulators offer high dexterity and manoeuvrability in constrained environments, yet their design must integrate structural efficiency with environmental adaptability. This study presents a co-design framework for lightweight, cable-driven hyper-redundant manipulators optimised for underwater applications, such as the usage in combination with a Remotely Operated Vehicle. Building on a modular architecture of an eight-degree-of-freedom cable-driven manipulator, the methodology integrates Gaussian process regression-based stress prediction and generative design to achieve mass and size reductions, as well as a hydrodynamically efficient shape while ensuring structural integrity under extreme static loads. A 3D-printed module fabricated from Onyx, a carbon fibre-reinforced nylon, achieved near-neutral buoyancy in seawater, validated through submerged testing of a two-module prototype. An external buoyant element design was then provided for manipulators with no inherent buoyancy, accounting for printability, density mismatch between actual and theoretical density, and joint range of motion. This work advances underwater hyper-redundant robot design by combining data-driven optimisation with modular buoyancy strategies and hydrodynamic efficiency, providing a scalable method for fluid environments.