Особливості термодеформування складених індукторів при магнітно-імпульсній обробці матеріалів

The problem of taking into account a non-stationary inhomogeneous temperature field in the analysis of the stress-strain state of inductor systems for magnetic-pulse processing of materials is considered. It follows from the analysis of open information sources that the problem of analyzing a non-stationary temperature field arising from the presence of a non-uniform electromagnetic field and its effect on deformation has been sufficiently studied in relation to induction heating. At the same time, during other operations of magnetic-pulse processing of materials, heating of equipment can cause additional deformations of a significant magnitude, which, in turn, can lead to a loss of equipment performance due to destruction or irreversible deformation. A general approach to the analysis of such problems is proposed, which involves the determination of the spatial-temporal distributions of the quantitative characteristics of the electromagnetic field, temperature field and stress-strain state. The necessity of using numerical methods for carrying out such an analysis has been substantiated. The most effective numerical method is the finite element method, which makes it possible to analyze the unsteady electromagnetic field, temperature field, and stress-strain state within the same calculation scheme. In this case, within the framework of the finite element method, iterative schemes can be created that allow taking into account nonlinear effects. Here, nonlinear effects can be due to the dependence of the mechanical and electro-physical properties of the material on temperature, the plastic nature of deformation, and the need to take into account contact phenomena. The results of complex analysis for a composite single-turn inductor with a dielectric band are presented. The features of contact interaction were taken into account by introducing layers of contact finite elements. The stress-strain state of the inductor is estimated for two variants of the materials used: copper and non-magnetic steel.